GE JXS81ES Manuel De Montage

Safety Glasses

Cut Resistant Gloves 

“If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com”

(3) ¼” drive #8 x 3/4” 

Sheet Metal Screws

T10 TORX

®

 Bit

Island Trim

31-10953   02-14   GE

In order to install the island trim kit, you must first 

remove the two (2) short trim pieces on both sides.

1.  Remove (3) three T10 TORX

®

 screws.

2.  Remove (1) one ¼” sheet metal screw retaining 

the rear trim and discard. 

NOTE: When the screws are removed from the 

rear trim it may flex away from the back of the 

range – this is normal.

3.  Remove short trim.
4.  Repeat steps 1 thru 3 on the opposite corner.

Nutdriver

Side Trim

Short Trim

Rear Trim

Sheet Metal 

Screw

T10 TORX

®

 Screws