GE GTW180SSJWW Manuel Du Propriétaire

„ Turn off water faucets to minimize leakage if a break or 

rupture should occur. Check the condition of the fill hoses; 

GE recommends changing the hoses every 5 years.

„ Ensure that the hot water hose is connected to the “H” 

(internal red screened) valve and the cold water hose is 

connected to the “C” (internal blue screened) valve.

„ Install or store where it will not be exposed to 

temperatures below freezing or exposed to the weather, 

which could cause permanent damage and invalidate the 

warranty.

„ Properly ground washer to conform with all governing 

codes and ordinances. Follow details in the Installation 

Instructions.

„ To ensure proper installation, run two small load size 

Whites cycles BEFORE washing the first load. 

„ This washer does not include water supply hoses.

  GE strongly recommends the use of factory specified 

parts. A list of factory hoses available for purchase are 

listed below. These hoses are manufactured and tested to 

meet GE specifications.

  GE strongly recommends the use of new water supply 

hoses. Hoses degrade over time and need to be replaced 

every 5 years to reduce the risk of hose failures and water 

damage.

Parts and Accessories
Call 1.800.661.1616 during normal business hours or contact 

your local authorized GE parts distributor.
Part Number 

PM14X10002 

4 ft Rubber Water Supply Hoses

Or
PM14X10005 

4 ft Braided Metal Water Supply Hoses

3