Thermador CIT36XKBB Manuel Du Propriétaire

20

Warnings
Warnings are displayed if an error occurs within the 

appliance which means you can only continue to use the 

cooktop with limitations. Follow the instructions on the 

display and touch CONTINUE to close the warning.

Note:  For some warnings, an error code is displayed 

(e.g.: [C3])
If necessary, specify the error code when you contact the 

after-sales service.

Error messages
Error messages are displayed if errors or malfunctions 

occur within the appliance with the result that you cannot 

continue to use the cooktop.
Disconnect the appliance from the electric supply by 

switching the circuit breaker to the off position for 15 

seconds. If the display appears again, call the after-sales 

service.

Note:  For some error messages, an error code is 

displayed (e.g.: [C0])
If necessary, specify the error code when you contact the 

after-sales service.

7KHFRRNZDUHLVWRRFORVHWRWKHWRXFKGLVSOD\5HPRYHDQ\KRW
LWHPVIURPWKHGLVSOD\:DLWXQWLOWKHWRXFKGLVSOD\KDVFRROHGGRZQ
VXIILFLHQWO\EHIRUHFRQWLQXLQJWRXVHWKHFRRNWRS

'LVFRQQHFWWKHFRRNWRSIURPWKHHOHFWULFVXSSO\E\VZLWFKLQJWKH
FLUFXLWEUHDNHUWRWKHRIISRVLWLRQIRUVHFRQGV,IWKHPHVVDJH
DSSHDUVDJDLQFDOO7KHUPDGRUVHUYLFHDWRUYLVLW
ZZZWKHUPDGRUFRP>&@

The size or shape of the cookware is not 

displayed correctly on the touch display.

Differences in how the cookware is shown on the display are normal and 

do not adversely affect the correct operation of the cooktop (particularly 

small cookware is shown as a round cooking position).
Two cooking positions that are quite close to each other may be dis-

played as one cooking position. Redistribute the cookware.
Never place the cookware outside of the usable cooking surface.

The boost function has been deactivated 

or cannot be activated.

You can only activate the boost function once on the right and left-hand 

halves of the cooktop. If a second cooking position is switched on or is 

already in operation, the boost function will not be available or is deacti-

vated and the cooking position returns to power level 9.0.

An audible signal sounds if there is an 

object on the touch display.

Remove the object and acknowledge the indicator on the display. You 

can now reset the cooktop.

The cookware is not detected.

The cookware is outside the appropriate size. Sizes with a diameter of 

3" (80mm) to 13¼" (340mm) are suitable.
There may be liquid under the cookware. Ensure that the base of the 

cookware is dry.
The cookware may not be suitable for induction cooking.

The cooktop switches off automatically.

If no cooking position is in operation on the cooktop and you do not 

change the settings for a prolonged period of time, the cooktop will auto-

matically switch off.

The cooking position cannot be adjusted. Only 2 cooking positions can be in operation on each side of the cooktop.

An item of cookware in the centre of the cooktop occupies one cooking 

position on each side of the cooktop. You can only set one other cooking 

position for each side of the cooktop.
The cookware may not be suitable for induction cooking.

The cooking position settings are not 

transferred when the cookware is moved.

Move the cooking container more slowly over the cooktop or use the 

transfer function.

The cooktop responds unusually or can 

no longer be operated correctly.

Disconnect the appliance from the electric supply by switching the circuit 

breaker to the off position for 15 seconds.