Speed Queen ADEE9BGS173TW01 Manuel Du Propriétaire
Favorite
The Favorite cycle keypad allows the user to save different cycles,
selections and options for later use. After pressing the Favorite
keypad, the control will display the cycle and modifier settings for
the first Favorite cycle. The 2-digit display will switch between F1
and the cycle time for the selected cycle. Pressing the Favorite
keypad again will save the current settings and display the next
Favorite cycle, F2. Pressing Start/Pause or Delay Start keypads
will also save the current settings. Pressing Power/Cancel keypad
will discard the currently selected Favorite cycle setting changes.
Nine favorite cycles can be saved.
selections and options for later use. After pressing the Favorite
keypad, the control will display the cycle and modifier settings for
the first Favorite cycle. The 2-digit display will switch between F1
and the cycle time for the selected cycle. Pressing the Favorite
keypad again will save the current settings and display the next
Favorite cycle, F2. Pressing Start/Pause or Delay Start keypads
will also save the current settings. Pressing Power/Cancel keypad
will discard the currently selected Favorite cycle setting changes.
Nine favorite cycles can be saved.
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change a Manual cycle’s temperature.
Choose from No Heat, Low, Medium or High.
Dryness
Press the Dryness keypad to change the dryness level in an Auto-
Sensing cycle. Choose from Damp, Less Dry, Near Dry or Dry.
Sensing cycle. Choose from Damp, Less Dry, Near Dry or Dry.
Damp
Leaves load slightly damp for
easier ironing.
easier ironing.
Less Dry
Use for lightweight items such
as sheets and shirts.
as sheets and shirts.
Near Dry
Use for normal loads.
Dry
Use for heavy items such as
blue jeans and blankets.
blue jeans and blankets.
Over-drying can cause wrinkling, shrinking, excessive lint conditions,
and will use more energy than necessary. To increase energy sav-
ings and to make sure loads are dried without over-drying, set your
Auto-Sensing loads on Near Dry or Less Dry. If items are damp or
over-dry at the end of a cycle, increase or decrease the Dryness
setting the next time these loads are dried. Remember the set-
tings that work best to get ideal drying results.
and will use more energy than necessary. To increase energy sav-
ings and to make sure loads are dried without over-drying, set your
Auto-Sensing loads on Near Dry or Less Dry. If items are damp or
over-dry at the end of a cycle, increase or decrease the Dryness
setting the next time these loads are dried. Remember the set-
tings that work best to get ideal drying results.
Moisture Level
The Moisture Level status lights will be lit during an Auto-Sensing
cycle. The Sensing light will be lit at the beginning of the cycle.
cycle. The Sensing light will be lit at the beginning of the cycle.
The Wet, Damp and Dry lights will be lit based on readings from the
moisture sensing system.
moisture sensing system.
Options
The following options can be used to modify the currently chosen
cycle, signal volume and control lock.
cycle, signal volume and control lock.
Anti-Wrinkle
This option prevents wrinkling by tumbling the clothes load after
the end of the cycle every two minutes for up to 60 minutes. The
display will show the time remaining. The option will end if the door is
opened.
the end of the cycle every two minutes for up to 60 minutes. The
display will show the time remaining. The option will end if the door is
opened.
EcoDry
The EcoDry option will reduce total energy consumption by de-
creasing the temperature of the cycle setting by 10% after the ini-
tial temperature setting has been reached.
creasing the temperature of the cycle setting by 10% after the ini-
tial temperature setting has been reached.
Signal
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four settings: Off, Low, Medium, High.
ume. There are four settings: Off, Low, Medium, High.
If the Anti-Wrinkle option is selected the signal will sound each time
the dryer tumbles.
the dryer tumbles.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.
Status
The Status lights are lit during the cycle to show what part of the
cycle is running.
cycle is running.
Door Open
The Door Open status light is lit
any time that the dryer door is
open.
any time that the dryer door is
open.
Heating
The Heating status light is lit
to indicate that a heat portion
of the cycle is currently operat-
ing.
to indicate that a heat portion
of the cycle is currently operat-
ing.
Cooling
The Cooling status light is lit
during the cool-down portion of
the cycle.
during the cool-down portion of
the cycle.
Extended
The Extended status light is lit
during the Anti- Wrinkle cycle
extension.
during the Anti- Wrinkle cycle
extension.
To Dry Clothes
IMPORTANT: Refer to the INSTALLATION INSTRUC-
TIONS before using dryer.
Operating Your Dryer
Part No. 514318R2
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
11