KRAM Interface Lead 68740 Fascicule

Codes de produits
68740
Page de 2
Installation description 
VDA cable 68740 for 
Saab / Opel / Vauxhall  
    
Connect the VDA cable to the VDA connector. The VDA connector is 
normally found behind the passenger side kick panel (LHD), behind  
glove  compartment  or  climacontrol  panel.  Connect  the  other  end 
through a carkitspecific interface adaptor to the carkit. 
 
SAAB  9.3  normally has the VDA 
plug placed behind the passen-
ger  kick  panel  on  the  center 
consol.  The  plug  is  wrapped  in 
tape. 
 
 
 
 
SAAB  9.5 normally has the VDA 
plug  placed  behind  the  Heater 
control  panel.  The  plug  is 
wrapped  in  tape  and  is  taped 
together  with  other  cables  and 
can therefore be hard to spot. 
 
 
 
After the installation you must adjust the phone volume to its mid-
dle position and then adjust the conversation sound level accord-
ing to the description in the radio manual. 
 
When  the  VDA  cable  is  installed  it  will  redirect  your  call  through 
the cars front speaker.  
 
Please remember to use a carkit interface adaptor cable to connect 
the carkit to the VDA cable. 
Interface Leads 
Interface Leads 
Product description
 
VDA cable 68740 for 
Saab / Opel / Vauxhall  
 
Interface  Leads  are used for car stereos with a Line-In func-
tion or VDA preparation. It enables the use of the car speakers 
when answering/making calls from your cell phone. Thereby 
using the radios build-in mute function. 
 
Speaker-function: This is achieved by connecting the carkit di-
rectly  to  the  cars  Line-In  input/VDA  connector.  By  using  the  
radios  built-in  relays  the  telephone  conversation  is  send 
through  the  car  speakers  while  the  radio  is  muted.  This  way 
you will achieve a perfect hands free sound without interfer-
ence from the car radio. 
 
For a complete cable-set two item no. is required. The first is 
a car-specific Interface Lead. The second is a carkit-specific In-
terface adaptor cable . 
 
Power  supply  of  the  carkit:  All  Interface  Leads  are  delivered 
with a power connector for the carkit, that way you avoid cut-
ting the cars wiring loom. 
 
Please  check  the  radio  instruction  manual  for  special  issues 
regarding the connection and set-up of the radio, when con-
necting a carkit.
 
See our complete Interface program on  
www.kram.dk