Kenyon B40575PUPS Manuel Du Propriétaire

Installing the Cooktop

There are two mounting brackets supplied with the glass ceramic cooktop.  These brackets are 

designed to hold the cooktop firmly in place.  The cooktop does not have a metal frame and 

should be bedded to the countertop using a soft bedding compound that will prevent damage if 

later removal for service is necessary.  We recommend a very small bead of silicone sealant.  If 

mounting in granite countertop use only 100% silicone sealant.

Attach the two mounting brackets supplied with the KENYON cooktop (please refer to the figure 

C on page 8) to the inside vertical surface of the cutout.  The brackets are to be mounted on op-

posing sides.  Center the bracket in the opening, flush with the countertop and secure with long 

self-tapping screws that are provided.  Position the cooktop in the cutout opening and press firmly 

on all sides to seal the frame into the bedding compound.  Secure the cooktop to the 

brackets from underneath with the small sheet metal screws that are supplied.

Electrical Connection

Before proceeding further, verify that the power 

supply is disconnected.  Verify that the 

appropriate electrical supply requirements have 

been met.  Please refer to the table on page 

5 for appropriate electrical requirements.  The 

cooktop is supplied with a 36-inch long 

conduit for a connection to an accessible 

junction box.  The 240V and 208V conduit 

consists of three insulated wires.  There are 

two insulated hot lead conductors (red and 

black) and one insulated ground conductor 

(green).  The 120V conduit consists of three 

insulated wires.  There is the hot lead 

conductor (black), the nuetral conductor (white) 

and one insulated ground conductor (green).

Attach conductor wires to residence wiring in 

accordance with national, state and local 

electric codes.

Lite-Touch™ Q COOKTOP

# 8 X 1/4" SCREW

# 6 X 1 1/4" S/S SCREW

MOUNTING BRACKET

COUNTER SURFACE

Fig. C

9