Summit FFBF181SSIM Manuel D'Instructions
253479
Before the fi rst use of the appliance fi rst plug the power cable
into the wall socket. Display indicates dashes for both the
refrigerator and the freezer.
- Switch the appliance ON by pressing the button A for 3
into the wall socket. Display indicates dashes for both the
refrigerator and the freezer.
- Switch the appliance ON by pressing the button A for 3
seconds. Both the refrigerator and the freezer are started,
green signal lamps B and D are on. In this mode you can
switch off the refrigerator only by pressing button C for 3
seconds (green signal lamp D is off).
green signal lamps B and D are on. In this mode you can
switch off the refrigerator only by pressing button C for 3
seconds (green signal lamp D is off).
- Refrigerator temperature of + 48°F is indicated on the display.
This value will remain on the display until the temperature in
the refrigerator drops below this level.
the refrigerator drops below this level.
The appliance has been preset in the factory to the
recommended temperatures of the refrigerator to +41°F and
freezer to 0°F.
recommended temperatures of the refrigerator to +41°F and
freezer to 0°F.
Temperature setting range of the refrigerator: +34°F do
+48°F.
Temperature setting range of the freezer: 7°F do -9°F.
• To set the freezer temperature, fi rst select the freezer by
+48°F.
Temperature setting range of the freezer: 7°F do -9°F.
• To set the freezer temperature, fi rst select the freezer by
pressing the M button (letter “F” will be indicated on the display
N); then, use the K button to set the desired temperature.
To set the refrigerator temperature, fi rst select the refrigerator
by pressing the M button (letter “R” will be indicated on
the display N); then, use the K buttons to set the desired
temperature.
N); then, use the K button to set the desired temperature.
To set the refrigerator temperature, fi rst select the refrigerator
by pressing the M button (letter “R” will be indicated on
the display N); then, use the K buttons to set the desired
temperature.
• After pressing the temperature setting buttons the display
starts fl ashing and indicates the last selected setting.
• Temperature setting is changed by short consecutive pressing
of the button in 1°F steps. During the setting procedure all
other buttons are idle.
other buttons are idle.
• Approximately 5 seconds after the setting button is released
the display indicates the actual temperature.
Alarm
Continuous sound - open refrigerator door alarm
If the refrigerator door is open for more than one minute, the
sound alarm is turned on (continuous tone) and red signal lamp
J is on. The alarm is automatically switched off when the door is
closed, but you can also switch it off by pressing the Alarm Off
button (I).
If the refrigerator door is open for more than one minute, the
sound alarm is turned on (continuous tone) and red signal lamp
J is on. The alarm is automatically switched off when the door is
closed, but you can also switch it off by pressing the Alarm Off
button (I).
Intermittent sound - freezer/refrigerator temperature is too
high
Sound alarm is also activated in case of elevated temperature
(intermittent tone), and the temperature on the display is fl ashing.
high
Sound alarm is also activated in case of elevated temperature
(intermittent tone), and the temperature on the display is fl ashing.
Switching the appliance
ON/OFF
ON/OFF
Temperature setting
Other settings
10