Summit FFBF181SSIM Manuel D'Instructions
253479
• Place the appliance in a dry and well-aired room. Ambient
temperature should never be lower than 41°F.
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
injuries or damage to the appliance.
• Place the appliance fl at and fi rmly on a solid base. The
appliance is fi tted with adjustable feet on the front side, used
to level the appliance. The rear side of the appliance is fi tted
with wheels facilitating the positioning of the appliance at the
preselected place.
to level the appliance. The rear side of the appliance is fi tted
with wheels facilitating the positioning of the appliance at the
preselected place.
• Allow at least 2 inches of space above the appliance to ensure
suffi cient cooling of the condenser.
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not possible, install an insulation plate
between the appliance and the adjacent heat source.
between the appliance and the adjacent heat source.
• The bottom front corners of the appliance are fi tted with
handles to facilitate moving. The appliance may stand
independently or adjacent to a wall, cabinet or other appiance.
Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury. Also leave
ample space for removing shelves (see installation diagram).
independently or adjacent to a wall, cabinet or other appiance.
Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury. Also leave
ample space for removing shelves (see installation diagram).
• Two spacers attached to the appliance must be fi tted onto the
upper edge of the condenser, thus preventing the appliance
from being installed too close to the wall.
from being installed too close to the wall.
Selecting the location
Positioning the
appliance
appliance
6
Installation and connection