KRAM Igni-Box for 2G Drive & Talk 69600 Fascicule
Codes de produits
69600
IGNI-BOX
Product Description
69600 IGNI
69600 IGNI
69600 IGNI
69600 IGNI----BOX and IGNI
BOX and IGNI
BOX and IGNI
BOX and IGNI----BOX adaptor
BOX adaptor
BOX adaptor
BOX adaptor
The IGNI-BOX makes the need for an ignition wire, when in-
stalling aftermarket car accessories, redundant.
Many new cars do not have an easy accessible switched igni-
tion wire due to the use of Bus based vehicle control net-
works like CAN-bus. This has spawned the need for a fast
and versatile Ignition substitute.
For this reason we have invented the IGNI-BOX. This small
microprocessor controlled unit makes an artificial switched
Ignition based on the noise levels on the constant 12v wire.
To make the needed calculations the IGNI-BOX makes up to
4000 measurements pr. second.
The IGNI-BOX will switch on the ignition signal when the en-
gine is turned on. On some car models it will even turn on
the ignition signal as soon as the key is inserted into the igni-
tion barrel and that way being very similar to the normal ig-
nition functionality in older cars.
A normal IGNI-BOX item number consists of two items. The
1st item is the IGNI-BOX and the 2nd item is the IGNI-BOX
adaptor. The IGNI-BOX adaptor makes the installation plug
and play when installing a Kram Telecom cable set. Some
IGNI-BOX adaptors even exists for OEM Carkit cablesets. But
all the IGNI-BOX really needs in order to make an artificial ig-
nition signal is a connection to the constant 12v and the
ground wire. The installation is that simple.
stalling aftermarket car accessories, redundant.
Many new cars do not have an easy accessible switched igni-
tion wire due to the use of Bus based vehicle control net-
works like CAN-bus. This has spawned the need for a fast
and versatile Ignition substitute.
For this reason we have invented the IGNI-BOX. This small
microprocessor controlled unit makes an artificial switched
Ignition based on the noise levels on the constant 12v wire.
To make the needed calculations the IGNI-BOX makes up to
4000 measurements pr. second.
The IGNI-BOX will switch on the ignition signal when the en-
gine is turned on. On some car models it will even turn on
the ignition signal as soon as the key is inserted into the igni-
tion barrel and that way being very similar to the normal ig-
nition functionality in older cars.
A normal IGNI-BOX item number consists of two items. The
1st item is the IGNI-BOX and the 2nd item is the IGNI-BOX
adaptor. The IGNI-BOX adaptor makes the installation plug
and play when installing a Kram Telecom cable set. Some
IGNI-BOX adaptors even exists for OEM Carkit cablesets. But
all the IGNI-BOX really needs in order to make an artificial ig-
nition signal is a connection to the constant 12v and the
ground wire. The installation is that simple.
FOR THE PROFESSIONAL INSTALLER
IGNI-BOX
FOR THE PROFESSIONAL INSTALLER
Made in Denmark by
Kram Telecom A/S
Kram Telecom A/S
Connector configurations
+12
NC
1
-
2
3
Technical Specifications
Voltage supply range :
10-16 VDC
Current usage :
<1 mA (passive)/2mA-3A (active)
Activation voltage
Active :
> +10VDC
Passive :
< +10VDC
Maximum current supplied by ignition:
1A. Active when High.
Measurements pr. Second: >3500
Size L x W x H:
75 x 20 x 14 mm
EN950
See our complete Radio Mute program on our website www.kram.dk
Input connector
Output connector
1
IGN
NC
+12
3
2
NC
-