GE GCG1500RBB Manuel De Montage

• The top of the compactor should be at least 1/8

″ 

(3 mm) from the top of the cabinet opening. You
can adjust the height of the compactor by turning
the screws on the front leveling legs and rear
wheels.

• Place a level inside the compactor on the floor 

of the cabinet.

• Use the leveling legs to adjust level front to back

and side to side.

Front leveling legs

Rear wheels

• Determine installation depth of the compactor

beneath the countertop.

• Adjust the position of the retaining brackets so

that the screws can meet the underside of the
countertop. 

• Mounting clips are provided for stone or other

hard countertops that will not accept screws.

Retaining
bracket

Countertop

A toekick extension is supplied. It can be used to
cover any gaps from the bottom of the compactor
to the floor. ZCGS150SS and ZCGP150II Models are
also supplied with extra toekicks which can replace
the original toekicks assembled on the compactor. 

• Remove the top toekick screws as shown. Lift off

top toekick piece.

• Loosen the base toekick screws, adjust to touch

the floor and tighten the screws. If replacing the
toekick, remove the screws and lift off the toekick.
Install the new toekick with the original screws.

• Reinstall the top toekick piece with the original

screws.

Loosen screw 
on each side

Top toekick

Base toekick