Smeg SMF01 Manuel De Montage
Cleaning and Care
25
EN
The mixer vibrates
The mixer is not resting on a stable
surface.
surface.
Place the mixer on a flat,
stable surface.
stable surface.
The anti-slip rubber feet are worn.
Have them replaced at an
Authorized Service Center.
Authorized Service Center.
The speed used is too high or the
load is excessive.
load is excessive.
Set a lower speed and
ensure the bowl has not
been overfilled.
ensure the bowl has not
been overfilled.
The bowl has not been correctly
locked into its base.
locked into its base.
Check that the bowl is
correctly locked into its
base.
correctly locked into its
base.
The attachment hits the
bottom of the bowl
bottom of the bowl
The lower attachment shaft has
come loose over time.
come loose over time.
Have the mixer checked
and adjusted at an
Authorized Service Center.
and adjusted at an
Authorized Service Center.
The attachment is not correctly
locked into position.
locked into position.
Move the speed selector to
0, press the button on the
rear of the appliance to
raise the head and check
that the attachment is
correctly locked into
position on the lower
attachment shaft.
0, press the button on the
rear of the appliance to
raise the head and check
that the attachment is
correctly locked into
position on the lower
attachment shaft.
Problem
Possible cause
Solution