Summit SCR600LOS Utilisation Et Entretien

Page de 7
Placing and Installation 
 
Choosing the Right Place 
 
 
 
Place the appliance in a dry and regularly ventilated place.  Allowed ambient  
 
temperature depends on the model (class) of the appliance and is stated on the  
 
rating plate of the appliance. This refrigerator is class N (outdoor or indoor use). 
 
 
 
Class Ambient 
Temperature 
SN (sub-normal) 
from + 56°F to + 90°F 
N (normal)(outdoor) 
from + 45°F to + 100°F 
ST (sub-tropical) 
from + 64°F to +100°F 
T (tropical) 
from + 64°F to +120°F 
The appliance may be exposed to lower or higher temperatures but only for a       
short period of time and the temperature should never be lower than 45°F. 
 
Never place the appliance near heat emitting devices (e.g. cooker, radiator, water  
 
heater or similar devices) and do not expose it to direct sunlight. 
 
Connection to Power Supply 
 
Connect this appliance to a 3 prong power supply socket outlet (which has a 
ground terminal). If you only have a two prong outlet have it replaced by a 
qualified technician with an outlet that meets the local codes.  
 
“DO NOT USE AN EXTENSION CORD.” 
 
Required nominal voltage and frequency are indicated on the rating plate. 
The connection to the power supply and grounding has to be made according to current 
standards and regulations.  The appliance resists temporary voltage tolerance from -15 to 
10%.  A GFCI (ground fault circuit interrupter) is built into every line cord. Do not 
defeat or bypass this important safety feature. 
 
 
The line cord supplied with this refrigerator is specially designed for outdoor 
use.  Use only a factory supplied replacement cord with a GFCI in the event the 
cord becomes damaged. 
 
 
You may purchase these cords from either our sales or service department at  
718-893-3900 (sales) or 718-328-8700 (service). 
 
 
 
 
 
 
 
 
 
Instructions for Use 
 
4