Samsung RF24FSEDBSR Manuel D’Utilisation

18_

 

operating

Cooling 

Off Mode

- North American (US, Canada) Models Only ;
Cooling Off mode (also called Shop 
mode), is designed for use by retailers 
when they are displaying refrigerators on 
the shop floor. In Cooling Off mode, the 
refrigerator’s fan motor and lights work 
normally, but the compressors do not run, 
and the refrigerator and freezer do not get 
cold. To start Cooling Off mode, touch 
and hold the Energy Saver button and 
the Freezer button for 5 seconds during 
normal operation. The refrigerator chime 
sounds and the temperature display 
flashes OFF.
To cancel Cooling Off mode, touch and 
hold the Energy Saver and the Freezer 
buttons again for 5 seconds.

CHANGING THE WATER 
FILTER

To reduce the risk of water damage 
to your property DO NOT use generic 
brands of water filters in your SAMSUNG 
Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTERS. 
SAMSUNG is not legally responsible for any 
damage, including, but not limited to, 
property damage caused by water 
leakage from the use of a generic 
water fi lter. SAMSUNG Refrigerators 
are designed to work ONLY WITH 
SAMSUNG Water Filters.
The Filter light turns red to let you know when it is 
time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light 
comes on just before the capacity of the current 
fi lter runs out. Changing the fi lter on time provides 
you with the freshest, cleanest water from your 
refrigerator.

To change the water fi lter, follow these steps:
1.  Shut off the water supply. Then, turn the water 

filter ( 1 ) about 1/4 turn, counter-clockwise.

2.  Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, 

shut off the water supply valve.

•  Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it 

WARNING

to stick. If you are having difficulties, grip the 
water filter firmly and pull it hard.

•  When you pull the water filter, a little water 

can leak from the opening. This is normal. 
To minimize the water leaks, keep the filter 
cartridge horizontal when you pull it.

•  To prevent overflow, 

empty the water 
filter tray ( 3 ) and 
dry around the filter 
case ( 2 ).

3.  Insert the new filter into the filter case ( 4 ).
4.  Push the filter, and then turn it clockwise until 

it locks.

•  If you have trouble inserting the water 

filter because of high water pressure, 
shut off the water supply valve.

•  The locked symbol should be lined up 

with the indicator line.

5.  Touch the “Alarm/hold 

3 sec for Filter Reset” 

button ( 

(Filter Reset)

(Filter Reset)

 ) for 

about 3 seconds to reset 
the water filter. The color of 
the indicator ( 

 ) changes from red to off.

6.  If you turned off the water supply, turn it back 

on.

For a replacement water filter, you can visit 
your local home Improvement center or 
contact the Samsung Parts distributor. 
To order more water filter cartridges, 
contact your authorized Samsung dealer.
Be sure the replacement water filter has 
the SAMSUNG logo on the box and on the 
water filter.

Removing any residual matter inside 
the water supply line after installing 
the water fi lter.

1.  Turn ON the main water 

supply and supply water 
from water supply line.

2.  Run water through the 

dispenser until the water 
runs clear (approx. 6 to 

(Red)

(Red)

2

1

3

2

4

DA68-02897A-07.indb   18

DA68-02897A-07.indb   18

2014. 6. 23.   

 5:17

2014. 6. 23.   

 5:17