Gaggenau VK414610 Manuel De Montage
11
For flush mounting:
Installation Procedure
Installation of control console
Note: Only install the appliance in conjunction with
the corresponding control console.
the corresponding control console.
1
Remove the packaging of the control knobs and
the protective film from the light rings.
the protective film from the light rings.
2
Open the cover of the terminal box on the control
console. Secure the mains connecting lead as
shown in the terminal diagram and secure it with
pull relief. Close the terminal box cover.
console. Secure the mains connecting lead as
shown in the terminal diagram and secure it with
pull relief. Close the terminal box cover.
3
Hold the retaining plate against the front panel
from behind. Stick the control knobs into the
holes from the front and screw it tight from
behind with the nuts. Make sure that the control
knobs are correctly arranged.
from behind. Stick the control knobs into the
holes from the front and screw it tight from
behind with the nuts. Make sure that the control
knobs are correctly arranged.
4
Screw the control console tight to the retaining
plate using the nuts included.
plate using the nuts included.
Install Appliance
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the
OFF position.
power supply, make sure all controls are in the
OFF position.
1
Firmly insert the connecting lead from the
appliance on the control console. The plug must
engage. Plug the control cable on the appliance
in the socket. The plug must engage.
appliance on the control console. The plug must
engage. Plug the control cable on the appliance
in the socket. The plug must engage.
PP
PLQ
PD[
&/,&.