Samsung RS27FDBTNSR Manuel D’Utilisation

setting up 

01

 

SETTING

 UP

3.  Connect the water line installation kit to the 

shut off valve.

Shut off valve

Pipe clamp

Cold water line

Water line installation kit

Connecting the water supply line to 
the refrigerator.

There are several items that you need to purchase 
to complete this connection. 
You may find these items sold as a kit at your local 
hardware store.

•  ¼” copper tubing
•  ¼” compression nut 

(1pc)

•  Ferrule (2pc)

•  ¼” plastic tubing  

→

 Molded end (Bulb)

•  ¼” compression nut 

(1pc)

Compression Nut 

(1/4”) (Assembled) 

Ferrule 

(Not supplied)

Plastic Tubing 
(Assembled)

Compression 
Fitting (Assembled)

Molded end 
(Bulb)

Compression 
nut (B) (1/4”) 
(Not supplied)

or

Copper tubing 

(Not supplied)

Plastic tubing (B) 
(Not supplied)

Household water supply line

Refrigerator

1.  Connect the household water line to the 

assembled compression fitting.

 

- If you are using copper tubing, slip the 

compression nut ( 

B ) (not supplied) and 

ferrule (not supplied) on the copper tubing (not 
supplied) as shown.

 

- If you are using plastic tubing ( 

B ) , insert the 

molded end (Bulb) of the plastic tubing ( 

B ) into 

the compression fitting.

Do not use without the molded end (Bulb) 
of the plastic tubing ( 

B ).

2.  Tighten the compression nut ( 

B ) onto the 

compression fitting. 
Do not over-tighten the compression nut ( 

B ) .

3.  Turn the water on and check for any leakage. 

If you find water drops or leakage in the 
connection areas, turn off the main water 
supply. Check the connections and, if 
necessary, tighten.

4.  Flush 1 gallon of water through the filter before 

drinking or using the water from the refrigerator. 
(Flush approximately 6 minutes.) To flush, press 
a large glass or cup against the water dispenser 
lever. Fill the glass, empty it into the kitchen sink 
after it is filled, and then repeat.

5.  After you turn on the refrigerator, let the ice 

maker make ice for 1 to 2 days. Over that 
period of time, throw out the first 1 or 2 buckets 
of ice the freezer makes to ensure all impurities 
have been removed from the water line.

Only connect the water line to a drinkable 
water source.

If you have to repair or disassemble the water line, 
cut off 1/4“ of the plastic tubing to make sure you 
get a snug, leak-free connection.

You can test the water line quickly using a 
paper cup. Under normal conditions, the 
water dispenser can fill a 5.75 oz. (170 cc) 
cup in about 10 seconds.

DA68-02935A-02.indb   21

13. 8. 28.   �� 9:10