Samsung RF25HMEDBBC Utilisation Et Entretien
English - 20
To save electricity, the Panel Display turns off
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the
icon indicating your cubed or crushed ice
selection, will stay on. When you press a
button, open a door, or push a Dispenser
Lever, the Panel Display will turn on again.
Except for the Energy Saver, Water, and
Cubed/Crushed Ice buttons, all function
buttons will become operational after you
remove your finger from the button you are
currently pressing.
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the
icon indicating your cubed or crushed ice
selection, will stay on. When you press a
button, open a door, or push a Dispenser
Lever, the Panel Display will turn on again.
Except for the Energy Saver, Water, and
Cubed/Crushed Ice buttons, all function
buttons will become operational after you
remove your finger from the button you are
currently pressing.
( 10 )
Ice Maker
Off
If you don’t want to make more ice, touch
the Ice Maker Off button.
The icon will light up and the Ice-Maker
stops making ice.
the Ice Maker Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice
making if the following occur:
making if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and
energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from the back of the unit. If this
occurs, press the Ice Maker Off
(Control Lock(3sec)) button for less
than 3 seconds until the Ice Off
the water line is not connected,
there will be a water valve noise
from the back of the unit. If this
occurs, press the Ice Maker Off
(Control Lock(3sec)) button for less
than 3 seconds until the Ice Off
Indicator (
) illuminates.
Cooling
Off Mode
Cooling Off mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop fl oor.
In Cooling Off mode, the refrigerator’s
fan motor and lights work normally, but
the compressors do not run, and the
refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Freezer, Fridge and Alarm buttons for
5 seconds during normal operation.
The refrigerator chime sounds and the
temperature display fl ashes OFF.
To cancel Cooling Off mode, touch and
hold the Freezer, Fridge and Alarm buttons
again for 5 seconds.
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop fl oor.
In Cooling Off mode, the refrigerator’s
fan motor and lights work normally, but
the compressors do not run, and the
refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Freezer, Fridge and Alarm buttons for
5 seconds during normal operation.
The refrigerator chime sounds and the
temperature display fl ashes OFF.
To cancel Cooling Off mode, touch and
hold the Freezer, Fridge and Alarm buttons
again for 5 seconds.
WARNING
CHANGING THE WATER
FILTER
FILTER
To reduce risk of water damage
to your property DO NOT use
generic brands of water fi lters
in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND
WATER FILTERS. SAMSUNG
is not legally responsible for any
damage, including, but not limited
to, property damage caused by
water leakage from the use of a
generic water fi lter. SAMSUNG
Refrigerators are designed to work
ONLY WITH SAMSUNG Water
Filters.
to your property DO NOT use
generic brands of water fi lters
in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND
WATER FILTERS. SAMSUNG
is not legally responsible for any
damage, including, but not limited
to, property damage caused by
water leakage from the use of a
generic water fi lter. SAMSUNG
Refrigerators are designed to work
ONLY WITH SAMSUNG Water
Filters.
(Red)
(Red)
The Filter light turns red to let you know when it is
time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light
comes on just before the capacity of the current
fi lter runs out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light
comes on just before the capacity of the current
fi lter runs out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
2
1
• To change the water filter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
• When you pull the water filter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow, empty the water tray filter
( 3 ) and dry around of case filter ( 2 ).
DA68-02952A-03.indb 20
DA68-02952A-03.indb 20
2014. 10. 13.
2:50
2014. 10. 13.
2:50