Samsung RF28HMEDBWW Manuel Du Produit

Page de 116
English - 14
RE-ASSEMBLING THE 
FREEZER DOOR
To reattach the drawer after you have moved
the fridge to its fi nal location, assemble the parts 
in reverse order.
 ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can 
make fi nal adjustments. Use a level to test if the 
refrigerator is level both side to side and back to 
front. If the refrigerator is not level, you will not 
be able to get the doors perfectly even, which 
may cause moisture condensation and increased 
energy bills. Below is an example of how to level 
the refrigerator if the left side of the refrigerator is 
lower than the right side.
How to adjust the level 
1.   Open the freezer drawer and remove the lower 
basket.
2.   Insert a flat-blade screwdriver (-) into the 
notch on the left control lever, and then turn 
it counter-clockwise to level the refrigerator. 
(You turn the lever clockwise to lower the 
refrigerator and counterclockwise to raise it.)
flat-blade 
flat-blade 
screwdriver (-)
screwdriver (-)
Control Lever
Control Lever
CAUTION
Both control levers must be touching the fl oor to 
avoid possible personal injury or property damage 
because of tipping.
If the right side is lower, perform the same 
procedure, but with the right control lever.
It is difficult to remove the cover leg 
front from the refrigerator, so we do not 
recommend making small adjustments 
with the control lever. Instead, refer to the 
next page for the best way to make minor 
adjustments to the doors.
MAKING MINOR 
ADJUSTMENTS TO THE 
DOORS
Remember, a leveled refrigerator is necessary 
for getting the doors perfectly even. If you need 
help, review the previous section on leveling the 
refrigerator.
Adjustment 
Adjustment 
part
part
Fixed part
Fixed part
The left door is fixed. To make minor 
adjustments between doors, adjust only 
the right door.
1.  Pull out the Convertible door ( 1 ) to expose 
the lower hinge ( 2 ).
2.   Insert the supplied allen wrench (5/32” (4 mm)) 
( 3 ) into the shaft ( 4 ) of the lower hinge.
3.  Please adjust the height by turning the hex 
wrench ( 3 ) clockwise ( 
DOWN
DOWN
 ) or counter-
clockwise ( 
UP
UP
 ).
DA68-02952A-01.indb   14
DA68-02952A-01.indb   14
2013. 12. 3.   
 8:50
2013. 12. 3.   
 8:50