Samsung RF23HSESBSR Utilisation Et Entretien

setting up

 

01

 

SETTING

 UP

RE-ASSEMBLING THE FLEX 
DOOR

To reattach the flex doors, assemble parts in 
reverse order.

Be sure to connect the Flex Door Wire 
Connector.
If it is not connected, the Flex Room does 
not work.

DISASSEMBLING THE 
FREEZER DOOR

1.   Take out the upper drawer by lifting it up.

2.  Remove the freeze room guard ( 1 ) by lifting 

the guard up.

1

3.  Take out the lower 

basket ( 

2 ) by lifting 

the basket up from 
the rail system.

4.  Press the fixing 

hook of the rail 
system.

5.  Holding the top of the Freezer Drawer, pull it 

out all the way, and then remove it from the rail 
system.

Be careful not to scratch or dent the 
sliding rail by letting it strike the floor. 

Make sure that you mount the freezer 
basket in the right position when removing 
/ installing the freezer door. Failing to do 
so may result in the door not opening or 
closing properly. 
Putting too much food into the freezer 
drawers can prevent the freezer from 
closing completely and can cause frost 
build-up.

RE-ASSEMBLING THE 
FREEZER DOOR

To reattach the drawer after you have moved
the fridge to its final location, assemble the parts 
in reverse order.

ADJUSTING THE LEVEL

Make sure the refrigerator is level so that you can 

make final adjustments. Use a level to test if the 

refrigerator is level both side to side and back to 

front. If the refrigerator is not level, you will not 

be able to get the doors perfectly even, which 

may cause moisture condensation and increased 

energy bills. Below is an example of how to level 

the refrigerator if the left side of the refrigerator is 

lower than the right side.

How to adjust the level 

1.   Open the freezer drawer and remove the lower 

basket.

2.   Insert a flat-blade screwdriver (-) into the notch 

on the left control lever, and turn it counter- 
clockwise to level the refrigerator. (You turn the 
lever clockwise to lower the refrigerator and 
counterclockwise to raise it.)

2