Samsung RF23HCEDBSR Manuel Du Propriétaire

English - 13

SETTING

 UP

REMOVING THE REFRIGERATOR 
DOORS

For some installations, you need to remove the 
fridge and freezer drawers so you can move the 
refrigerator to its final location. 
Do not remove the doors/drawer if you don’t need 
to. If you do not need to remove the refrigerator 
doors, go to ‘Leveling the Refrigerator’ on page 
16. 
If you need to remove the doors. continue below. 
Before removing the door/drawer, make sure you 
read the following items:

Disconnect power to the refrigerator before 
removing the door or drawer.

•  Be careful not to drop, damage or 

scratch the door / drawer while removing 
them.

•  Be careful not to injure yourself while removing 

the doors / drawer.

•  Reattach the door/drawer properly to avoid: 

 

- Moisture from air leakage.

 

- Uneven door alignment.

 

- Wasting energy due to improper door seal.

Disassembling the refrigerator doors

Be careful not to drop and scratch the doors while 
removing them.

With the door opened

1.  Remove 3 screws holding down the TOP 

TABLE  ( 

1 ) and separate the connected wires.

(1)

2.  Disconnect two connectors ( 

2 ) on the left side  

door. To remove the water coupler from the 
hinge, twist and pull it from the hinge. 
Remove the water line ( 

3 ) while pressing the 

marked part ( 

4 ) of the water line coupler.

(2)

(3)

(4)

Red Clip 
(1/4")

If a red clip is on the coupler, you must remove it 
before removing the tube.

3.  Pull and remove the hinge lever ( 

5 ). Remove 

the ground screw ( 

6 ) attached to the upper 

left door hinges with a philips screwdriver (+). 
Remove the upper left and right door hinges 
( 

7 ).

(5)

(7)

(6)

DA68-02954A-03.indb   13

14. 10. 10.   �� 9:50