Fagor BMF200X Manuel D’Utilisation

Thoroughly dry all surfaces and removable 
parts. Although this appliance automatically 
defrosts, a layer of frost may occur on the 
freezer compartment’s interior walls if the 
freezer door is opened frequently or kept 
open too long. If the frost is too thick, 
choose a time when there is less food in the 
unit and proceed as follows: 

1. 

Remove existing food and all 
accessories, unplug the appliance 
from the outlet and leave the doors 
open. Ventilate the room thoroughly to 
accelerate the thawing process. 

2. When defrosting is completed, clean 

your freezer as described in the 
“Cleaning and Care” section (page 15). 

 

Caution! Don’t use sharp objects 
to remove frost from the freezer 
compartment. Only after the interior is 
completely dry should the appliance be 
plugged back in and switched back on. 

Remember to keep door seals clean. Sticky 
food and drinks can cause seals to stick 
to the cabinet and tear when you open the 
door. Wash seal with a mild detergent and 
warm water. Rinse and dry it thoroughly 
after cleaning. 

Caution! Only after the door seals are 
completely dry should the appliance be 
powered on. 

Warning: If the LED light is damaged, 
contact the customer service help line for 
assistance at 1-877-743-2467. To replace 
the LED light: 

1.  Unplug your appliance. 

2.  Remove the light cover by pushing up 

and out. 

3.  Hold the LED cover with one hand and 

pull it toward you with the other hand 
while pressing the connector latch. 

4.  Replace LED light and snap correctly in 

place.