Samsung RF26J7500 Utilisation Et Entretien
English - 10
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to ‘Leveling the Refrigerator’ on page 14.
adjusting legs are in the up position (above the
floor).
Refer to ‘Leveling the Refrigerator’ on page 14.
Flat-blade screw
driver (-)
driver (-)
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
ACCESSORIES AND REQUIRED
TOOLS
TOOLS
The following accessories are included with your
refrigerator:
refrigerator:
Hex wrench
Fastener
CAUTION
Keep the provided tools out of the reach of
children and make sure that children do not play
with them or put them into their mouths.
children and make sure that children do not play
with them or put them into their mouths.
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Pliers
Allen wrench
(3/16”) (5 mm)
DA68-02601D-00.indb 10
14. 11. 24. �� 11:08