Summit FFBF101 Utilisation Et Entretien
3) Remove the screws from the middle
hinge. Lift the refrigerator door up and
away from the appliance.
away from the appliance.
4) First loosen the screws and remove the
right hinge and gasket. Take out the left
hinge and remove the screws fixed to the
left hinge and shim. Finally attach the left
hinge and gasket using the screw holes on
the left side of the refrigerator.
hinge and remove the screws fixed to the
left hinge and shim. Finally attach the left
hinge and gasket using the screw holes on
the left side of the refrigerator.
5) Remove the pin assembly from the
bottom of the freezer and refrigerator
doors. On the opposite side, attach the
replacement pin assembly (located in the
plastic bag with the Use and Care Manual)
with a screwdriver. NOTE: You must
re-use the screw from the pin assembly
that is removed in this step when
attaching the new assembly.
doors. On the opposite side, attach the
replacement pin assembly (located in the
plastic bag with the Use and Care Manual)
with a screwdriver. NOTE: You must
re-use the screw from the pin assembly
that is removed in this step when
attaching the new assembly.
6) Place the freezer door on the bottom
hinge. Be sure the door is aligned
horizontally and vertically, and that the
gasket seals on all sides before attaching
the middle hinge. Attach the middle hinge
using a screwdriver.
horizontally and vertically, and that the
gasket seals on all sides before attaching
the middle hinge. Attach the middle hinge
using a screwdriver.
4