Samsung RF28HDEDPBC Utilisation Et Entretien
English - 15
SETTING
UP
1. Pull out the freezer drawer (
1 ) to reveal the
lower hinge (
2 ).
2. Insert the supplied allen wrench (5/32” (4 mm))
(
3 ) into the shaft ( 4 ) of the lower hinge.
3. Adjust the height by turning the hex wrench
(
3 ) clockwise (
DOWN
) or counter clockwise
(
UP
).
(3)
(1)
(3)
(2)
(4)
When you turn the hex wrench counter-
clockwise (
clockwise (
), the door will move up.
4. After adjusting the doors, insert the supplied
fastener (
6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet (
7 ) and the lower
hinge (
8 ).
The number of fasteners you’ll need to insert
depends on the gap.
depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04”.
refrigerator.
The thickness of each fastener is 0.04”.
WARNING
• Keep the fasteners used to level the refrigerator
doors out of the reach of children.
Do not let children play with them.
Do not let children play with them.
- There is a risk of death from suffocation if a
child swallows a fastener.
MAKING MINOR ADJUSTMENTS
BETWEEN OUT DOOR AND IN
DOOR
BETWEEN OUT DOOR AND IN
DOOR
After raising the out door, insert the supplied SHIM
HINGE MIDDLE in the gap between the OUT
DOOR and the HINGE-SHAFT.
HINGE MIDDLE in the gap between the OUT
DOOR and the HINGE-SHAFT.
SHIM HINGE MIDDLE are enclosed with
the refrigerator.
The thickness of RING is 0.04” (1 mm).
the refrigerator.
The thickness of RING is 0.04” (1 mm).
CAUTION
Keep the Rings out of the reach of children and
make sure that children do not play with them or
put them into their mouths.
make sure that children do not play with them or
put them into their mouths.
DA68-03029A-01.indb 15
2014. 3. 19. �� 9:24