Perlick HP24RS34R Utilisation Et Entretien

11

perlick.com

perlick residential installation manual

Compartments are warmer than usual

Control preset is set to warm

•  Lower the setpoint temperature. Refer 

to changing the set point for the specific 

model

Light is staying on

•  Turn the manual light switch off.

Condenser is dirty or obstructed

•  Clean the condenser and clear 

obstruction.

The door is open or has been opened more 
frequently lately.

•  Wait 24 hours and recheck the 

temperature.

Internal louvers and/or the fan guard is 
obstructed.

•  Reset the preset temperature if necessary 

– refer to page 5 and 6 of this guide.

•  Make sure the louvers and/or the fan are 

not obstructed.

Warm product product was recently placed in 
the cabinet.

•  Wait 24 hours for product to chill, then 

recheck the temperature.

System runs for a long period of time.

Condenser is dirty or obstructed.

•  Clean the condenser and clear the 

obstruction.

Door was kept open for a long time or was 
opened more frequently, or warm product 
was recently placed in the cabinet.

•  Wait 24 hours and recheck temperature.

Hot day and warm room temperature

•  Normal for the system to run more 

frequently.

Condensation forms inside the compartments High humidity and/or frequent door opening

•  Normal operation

Door is not closing and sealing properly

•  Make sure the door is closing properly. 

Check the door seal and replace if 

necessary.

•  If condensation persists, contact Perlick 

Technical Service at 800-558-5592