Smeg ST8649U Manuel D'Instructions

 

17

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits 

and staining; it is automatically added to the water during the final rinse cycle, from 

the container situated on the inner side of the door.

To add rinse aid:

•   Open the door.

•   Rotate the container cover (ref. A fig. 5-02) anticlockwise by ¼ of a turn and re-

move it.

•   Add the rinse aid until the container is full (approximately 140 ml). The optical 

level indicator (ref. B fig. 5-02), on the side of the cap should be completely ob-

scured. Refill the rinse aid when the optical level indicator becomes clear again, 

or when the rinse aid warning light illuminates (see “Description of controls” 

manual).

•   Replace the cover (ref. A fig. 5-02) by turning it in a clockwise direction until it is 

fully closed.

•   Use a cloth to remove any spillage of rinse aid which might lead to the formation 

of excess foam.

The rinse-aid dispenser can be set to one of 6 different levels. The dishwasher is 

factory set for medium water hardness (selector set to “3”). To change the setting, 

turn the dispenser selector (ref. c fig. 5-02) to the desired position: the amount of 

rinse-aid dispensed is proportional to the position of this selector. Make sure that 

the minimum amount of rinse-aid (selector turned to “1”) is approximately 1 ml and 

the maximum amount (selector turned to “6”) is approximately 6 ml.

Fig. 5-02