Samsung RS25H5000SR Utilisation Et Entretien

English - 12

Separating the water supply line from 
the refrigerator

1.  Remove two water lines by pressing the 

coupler ( 

1 ) and pulling the water line ( 2 ) 

away.

(1)

(2)

Make sure the color of the water lines match.

Reattaching the Water Supply Line

1.  The Water Line must be fully Inserted to the 

center of transparent coupler to prevent water 
leakage from the dispenser.

2.  Insert the 2 clips in the install pack and check 

that each clip holds the line firmly.

Center of Transparent coupler

Clip A (1/4”) 
(6.35 mm)

Do not cut the water line. Gently separate 
it from the coupler.

Removing the freezer door

A few things to mention first.

•  Make sure that you lift the door straight up so 

the hinges are not bent or broken.

•  Be careful not to pinch the water tubing and 

wire harness on the door.

•  Place doors on a protected surface to prevent 

scratching or damage.

•  Is necesary two people for disassembling 

doors.

1.  With the Freezer door closed, remove the 

upper hinge cover ( 

1 ) using a screwdriver, and 

then disconnect the wires ( 

2 ).

(2)

(1)

Be careful, no damage sensor harness 
with cover hinge.

2.  Remove hinge bolts ( 

3 ) with a 10 mm Socket 

Wrench and a ground screw ( 

4 ) counter-

clockwise, and take off the upper hinge ( 

5 ) in 

the direction of the arrow. 
Be careful when removing the door to ensure 
that it does not fall on you.

(4)

(3)

(5)

Pressing

SSEDA-14 (RS25H5121) ���.indd   12

2013. 11. 28.   �� 11:28