Samsung RF263BEAESP Utilisation Et Entretien

Page de 92
operating
 
_17
( 8 ) Filter
Water filter usage
This icon will light up when you need to 
change the filter. After you use about 
300 gallons of water, the filter indicator 
lights up. (about 6 months). After you 
install the new water filter, reset the filter 
indicator by touching the Ice Type Water/
Hold 3 sec for Filter Reset button. 
If water is not dispensing or 
t  
dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.
Some areas have large amounts 
t  
of lime in their water, which 
causes the water filter to clog 
more quickly.
Cooling Off 
Mode
mode), is designed for use by retailers 
when they are displaying refrigerators on 
refrigerator’s fan motor and lights work 
normally, but the compressor does not 
run, and the refrigerator and freezer do 
touch and hold the Energy Saver button 
and the Freezer button for 5 seconds 
during normal operation. The refrigerator 
chime sounds and the temperature 
display flashes OF OF.
hold the Energy Saver and the Freezer 
buttons again for 5 seconds.
CHANGING THE WATER FILTER
To reduce risk of water damage to your 
property DO NOT use generic brands 
of water filters in your SAMSUNG 
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from the use of 
a generic water filter. SAMSUNG Refrigerators are 
designed to work ONLY WITH SAMSUNG Water 
Filter.
The Filter light turns red to let you 
know when it is time to change your 
water filter cartridge.
To give you time to get a new filter, 
the red light comes on just before the 
capacity of the current filter runs out. 
Changing the filter on time provides you with the 
freshest, cleanest water from your refrigerator.
1. 
filter ( 1 ) about 1/4 turn, counter-clockwise.
 Pull the water filter ( 
2. 1 ) from the case filter (  2 ).
To change the water filter more easily, 
t  
 Sometimes, it is hard to disassemble the water 
t  
filter because impurities in the water cause it 
to stick. If you are having difficulties, grip the 
water filter firmly and pull it hard.
 When you pull the 
t  
water filter, a little 
water can leak from 
the opening. This is 
normal. To minimize 
the water leaks, keep 
the filter cartridge horizontal when you pull it.
       
y
a
r
t
 
r
e
t
l
 
r
e
t
a
w
 
e
h
t
 
y
t
p
m
e
 ,
w
o
r
e
v
o
 
t
n
e
v
e
r
p
 
o
T
t  
( 3 ) and dry around the filter case (  2 ).
 Insert the new filter into the filter case ( 
3. 4 ).
Push the filter, and then turn it clockwise until it 
4. 
locks.
 If you have trouble inserting the water 
t  
filter because of high water pressure, 
The locked symbol should be lined up 
t  
with the indicator line.
Touch the 
5. “Ice Type/Water 
Hold 3 sec for Filter Reset
” 
button (
(Filter Reset)
) for 
about 3 seconds to reset 
the water filter. The color of 
of the indicator (         ) changes from   
6. 
on.
For a replacement water filter, you can 
visit your local home Improvement center 
or contact the Samsung Parts distributor. 
Be sure the replacement water filter has 
the SAMSUNG logo on the box and 
on the water filter. Link : http://www.
samsungparts.com
WARNING
(Red)
3
2
4
2
1
DA68-02601A(EN+FR+ES)-0.2.indb   13
2012.3.31   9:49:46 AM
02 OPERA
TING