Lynx L30PSR2 Manuel Du Propriétaire
35
Keep threading compound
off of the first two pipe
Keep thr
Keep threading compound
eading compound
threads to avoid having
off of the first two pipe
off of the first two pipe
any small pieces of
threads to avoid having
threads to avoid having
compound break loose and
any small pieces of
any small pieces of
clog a burner valve or
compound break loose and
compound break loose and
orifice. Do not use
clog a burner valve or
clog a burner valve or
threading compound on
any flare fittings
threading compound on
threading compound on
.
for
built-in installations, it is rec-
ommended that any flexible
pipe used be kept as short
as possible.
pipe used be kept as short
pipe used be kept as short
(see indeX: “gas
connections” for typical permanent
hook up.)
for
freestanding
units using
freestanding
freestanding
natural gas, lynx str
ll
ongly
recommends using a quick
disconnect kit.
recommends using a quick
recommends using a quick
, is available from your dealer
lp gas
grills set up for lp gas come
equipped with an LP hose/
rills set up for
rills set up for
regulator assembly for con-
equipped with an LP hose/
equipped with an LP hose/
nection to a standard 20 lb. lp
cylinder. (Type 1). All fittings
necessary to attach the
cylinder. (Type 1). All fittings
cylinder. (Type 1). All fittings
assembly to the grill are
included.
Keep
last two
Keep
Keep
threads
clean
connection
permanently plumbed lp con-
nections, such as those in line
ermanently plumbed
ermanently plumbed
with a bulk cylinder, require
with a bulk cylinder
with a bulk cylinder
a 4/11 regulator. (lynx
ll
p/
, require
, require
n
30781)
when using the 4/11 regulator
you must ensure that it is set for
the proper fuel type. this is done
by removing the regulator cap and
gasket and looking at the bottom
of the plunger to see what fuel
type is visible. this is the regulator
fuel setting. nat is for natural gas
nat
nat
and lp is for propane gas. the lp
setting can be further identified
by the large diameter disk on the
bottom of the plunger. to change
tt
from one gas to the other simply
push the plunger to the side to
snap it out of the cap, turn the
plunger so it reads the desired gas
type on the bottom, and push the
plunger until it snaps back into
place in the cap then replace the
cap into the regulator.
gas line to the grill.
warning
Do not change the regulator/hose
assembly or use any other assembly
than the one supplied with your
Lynx grill.
than the one supplied with your
than the one supplied with your
Do not attempt to use a 5LP-A
equipped regulator/hose assembly
Do not attempt to use a 5LP-A
Do not attempt to use a 5LP-A
with a standard 510 POL cylinder/
equipped regulator/hose assembly
equipped regulator/hose assembly
valve assembly.
Do not store a spare LP-gas cylinder
Do not store a spare LP-gas cylinder
under or near this appliance
Do not store a spare LP-gas cylinder
Do not store a spare LP-gas cylinder
Never fill the cylinder beyond 80
percent full
Never fill the cylinder beyond 80
Never fill the cylinder beyond 80
If the information above is not
followed exactly, a fire causing
death or serious injury may occur.
lp cylinder
requirements
the lp cylinder must be con-
structed and marked in accor-
dance with the specifications
for
dance with the specifications
dance with the specifications
lp gas cylinders of the
dance with the specifications
dance with the specifications
u.s
dance with the specifications
dance with the specifications
.
department of
gas cylinders of the
gas cylinders of the
transportation
tt
(dot
epartment of
epartment of
) and designed for use
epartment of
epartment of ransportation
ransportation
with a type 1 system only
tt
.
cylinders of free standing
grills must be secured using
the provided cylinder
retention system to avoid
the provided cylinder
the provided cylinder
accidental movement.
cylinder for a refill, exchange
only for a
cylinder for a refill, exchange
cylinder for a refill, exchange
type 1 20lb cylinder
tt
with an over
ype 1 20lb cylinder
ype 1 20lb cylinder
-fill protection
ype 1 20lb cylinder
ype 1 20lb cylinder
with an over
with an over
ype 1 20lb cylinder
ype 1 20lb cylinder
ype 1 20lb cylinder
ype 1 20lb cylinder
device.
never use a cylinder with a
never use a cylinder with a
damaged valve.
a dented or rusty lp cylinder
a dented or rusty lp cylinder
may be hazardous and should
be avoided. if in doubt, have
may be hazardous and should
may be hazardous and should
it checked by your lp supplier.
always check for leaks after
always check for leaks after
every lp cylinder change.
(see indeX: “leak test” for further
tt
details.)
always shut off the lp-gas
supply at the cylinder when
the grill is not in use.
supply at the cylinder when
supply at the cylinder when
cylinders must be stored
outdoors in a well-venti-
lated area out of the reach of
children. if your grill is stored
indoors, the lp cylinder must
be stored outside.