Kenyon B80201 Manuel Du Propriétaire

22  7/8"

23  1/2"

14  1/2"

3  1/4"

1/4" Radius in corners

12  1/2"

When making countertop cutout, 

radius the corner of the cutout (1/4” radius is typical).  This will 

prevent cracking of the countertop.  Follow the countertop manufacturer’s instructions regarding 

the minimum corner radius and reinforcement of corners.

Installing the Cooktop

There are two mounting brackets supplied with the glass ceramic cooktop.  These brackets are 

designed to hold the cooktop firmly in place.  The cooktop does not have a metal frame and 

should be bedded to the countertop using a soft bedding compound that will prevent damage if 

later removal for service is necessary.  We recommend a very small bead of silicone sealant.  If 

mounting in granite countertop use only 100% silicone sealant.

Attach the two mounting brackets supplied with the KENYON cooktop (as shown) to the inside 

vertical surface of the cutout.  The brackets are to be mounted on opposing sides.  Center the 

bracket in the opening, flush with the countertop and secure with long self-tapping screws that 

are provided.  Position the cooktop in the cutout opening and press firmly on all sides to seal the 

frame into the bedding compound.  Secure the cooktop to the 

brackets from underneath with the small sheet metal screws that are supplied.

7

22 7/8"

12 1/2"

23 1/2"

14 1/2"

3 1/4"

1/4" radius in corners