Electrolux EIFLS60JIW Utilisation Et Entretien

Turn the cycle selector knob in either direction 
to select the cycle desired. The indicator for 
that cycle will be illuminated. See the “Cycle 
Selection” section in this guide for descrip-
tions of each cycle.

The estimated cycle time, suitable wash and 
rinse water temperatures, fi nal spin speed, soil 
level, and options for each cycle will be indi-
cated for the cycle selected. See the “Cycle 
Settings” and “Washer Settings Chart” in this 
guide for descriptions and available settings 
for each cycle.

To change the settings, press the tempera-
ture, spin speed, soil, and options buttons to 
scroll to the desired settings.

To select or delete an option, press the button 
for that option. The indicator will light when 
the option has been selected. It will no longer 
be lighted when the option has been deleted.

As a safety measure, the door will automati-
cally lock during the entire wash cycle.

To add a forgotten item to the washer any time 
during the wash portion of the cycle, press 
pause. When the door unlocks, open the door, 
add the item, close the door and press start to 
resume the cycle.

If changes to the settings or options are at-
tempted after the cycle starts, you will hear 
several beeps when the buttons are pressed. 
To change the settings or options, press pause, 
make the new selections and press start again.

To change the cycle once the cycle has begun, 
press cancel, select a new cycle, and press 
start again. Just turning the cycle selector 
knob will not change the cycle.

To stop the cycle, press cancel.

To provide the best care for your laundry, not 
every setting or option is available with every 
cycle. If a setting or option is not available for the 
cycle selected, the indicator will not light.

If the cycle is interrupted during spin, the door 
lock will not release until the tub has stopped 
spinning. DO NOT force open the door.

Adjustments to a cycle will be remembered 
and recalled each time that cycle is selected in 
the future.

A signal will sound at the end of the cycle if the 
chime option has been selected.

Remove items from the washer when the cycle 
ends and place in dryer, line dry or dry fl at as 
directed on the fabric care label.

Follow the fabric care label instructions 
on items to be washed.

ENTRAPMENT and TIP-OVER HAZARD

An open door could entice children to hang on 
the door or crawl inside the washer. If there are 
no small children present, you may leave the 
door ajar to prevent mildew and odor build up.

Excess wrinkling, color transfer or odors may 
develop in items left in the washer after the 
cycle has ended, if not removed promptly.

To return to factory settings, 
press these two buttons at the 
same time and hold until the 
signal sounds.

Close the door and press start. The washer 
will not operate with the door open and 

DOOR 

OPEN

 will be displayed.

Select delay start to delay the beginning of 
the cycle for up to 22 hours if desired.