Moen YB5118 Fiche Technique
Towel Bar Posts are constructed of
zinc and towel bar is constructed of
stainless steel.
zinc and towel bar is constructed of
stainless steel.
YB5118BN
– 18” Towel Bar
Brushed Nickel Finish
YB5118CH
– 18” Towel Bar
Chrome Finish
YB5118ORB
– 18” Towel Bar
Oil Rubbed Bronze Finish
Cleaning Instructions:
2 5 3 0 0 A L MO E N D R I V E
N O R TH O L MS TE D , O H 4 4 0 7 0
C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9
F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6
I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0
F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6
C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6
F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0
W W W . MO E N . C O M
Copyright Creative Specialties International
Literature #BA1620
1.
Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
Using a level, align the template and tape it to the wall.
2.
Remove each mounting post from the body by loosening the
setscrew.
setscrew.
3.
Place each mounting post on the template with notch facing down.
4.
Mark the 2 large hole locations of each mounting bracket.
5.
Attach each mounting bracket to the wall, using the wall anchors
provided.
provided.
6.
Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down.
Assemble a set screw to each base. Use the allen wrench included
in hardware kit to tighten each set screw and secure the assembly to
the mounting bracket(s).
make sure that the base set screw hole(s) are facing down.
Assemble a set screw to each base. Use the allen wrench included
in hardware kit to tighten each set screw and secure the assembly to
the mounting bracket(s).
7.
Tighten all 4 screws. Do not over tighten.
8.
Place each post over the mounting plate (setscrew down). Pivoting
post with bar to be on left side. Tighten both setscrews.
post with bar to be on left side. Tighten both setscrews.
Stock Number:
______________________18” Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” Towel Bar
YB5118
Voss
™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
damp cloth. Dry well. Do not use commercial or abrasive cleaners.