Dacor ER30DSCHLP Manuel De Montage
8
Installation Instructions
Non-combustible
rear wall recommeded
Countertop Height: 35 5/8” (90.5 cm) min., 37 3/8” (94.9 cm) max.
Combustible side
wall above range
countertop opening
29 1/2” (74.9 cm)
30” (76.2 cm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
1/4” min. (6 mm)
Countertop
overhang
10” min.
(25.4 cm)
both sides
Countertop front
J K
rear wall recommended
Non-combustible
countertop opening
cabinet opening
below countertop
29 1/2” (74.9 cm)
27 1/2” (69.9 cm)
30” (76.2 cm)
2 3/8” (6.0 cm)
Combustible side
wall above range
10” min.
(25.4 cm)
both sides
Countertop Height: 35 5/8” (90.5 cm) min., 37 1/4” (94.6 cm) max.
Notch countertop
overhang to width of
cabinets
3/8” min. (1.0 cm)
Countertop
overhang
below countertop
Cabinet face
downdraft vent opening
J K
Countertop front
Planning the Installation
Notes For All Self-Rimming Installations:
•
On installations without a downdraft vent (see above), when
sliding the range into position, it will stop when the rear of
the control panel contacts the notches toward the front of the
countertop. The range trim will partially cover the overhang in
back.
•
On installations with a downdraft vent (see above right),
install Dacor trim kit ATK30SR. When sliding the range
into position, it will stop when the rear of the control panel
contacts the notches toward the front of the countertop. The
range trim will partially cover the front of the downdraft vent
chassis in back.
ER30DSR
J
K
without
downdraft vent
23 1/2”
(59.7 cm)
24” to
25 9/16”
with
downdraft vent
24”
(61.0 cm)
24 1/2” to
26 1/16”
Parts List
•
2 grates (PN 101524)
•
1 small stack burner cap
1
•
1 small stack burner ring
1
•
2 large stack burner caps
2
•
2 large stack burner rings
2
•
1 crown burner cap
3
•
1 crown burner ring
3
•
1 crown burner head
3
•
2 GlideRack™ oven racks
(PN 72915)
•
1 standard size rack
(PN 62139)
Preparing for Installation
WARNING
•
If the gas or electric service provided does not meet the
product specifications, do not proceed with the installation.
Call the dealer, the gas supplier or a licensed electrician.
•
Before installing the range, you must locate and secure the
anti-tip bracket to the floor.
•
Be sure that the unit is not connected to gas or power
before proceeding with the following sections.
IMPORTANT: Within the Commonwealth of Massachusetts, this
appliance must be installed by a licensed plumber or gas fitter.
NOTE: When installing a backguard, always install it before
NOTE: When installing a backguard, always install it before
sliding the range into place.
Unpacking the Range
Unpack the range and verify that all required parts have been
provided. If any item is missing or damaged, please contact
your dealer immediately. Do not install a damaged or incomplete
appliance. The customer must report cosmetic issues within 30
days of installation.
•
4 knobs
Left (PN 100127-01)
Right (PN 100127-02)
•
Anti-tip bracket w/screws
•
Meat probe (PN 72723)
•
Griddle (PN 700570)
•
Wok ring (PN AWR4)
•
Stainless steel cleaner
(PN A302)
•
Literature kit
•
Broiler pan/grill
(PN 82107/82106)
See the use and care manual for a list of optional accessories.
1
Small stack burner kit: PN 100699
2
Large stack burner kit: PN 700493
3
Crown burner kit: PN 100703
Cabinet Layout (cont.)
Top View - Model ER30DSR - Counter/Cabinet Cutout
Dimensions for Self-Rimming Installation
Top View - Model ER30DSR - Counter/Cabinet Cutout
Dimensions - Self-Rimming Installation with Downdraft