Thermador PRG304GH Mode D'Emploi

English 33

 

Before calling for service, check the following to avoid 
unnecessary service charges.

•

Is there a power outage in the area?

•

Is the household fuse blown or the circuit breaker 
tripped?

•

Is the range disconnected from the electrical supply?

•

Are the burner caps properly aligned and seated in the 
burner bases? 

•

Are the burner ports clogged? 

•

Is a fuse blown or is the circuit breaker tripped? 

•

Is the manual shut-off valve closed, preventing the flow 
of gas? 

The data rating plate shows the model and serial number of 
your range. It is located on the frame, behind the oven door 
(See illustration). 

The electric wiring diagrams and schematics in the toe kick 
area should not be removed except by a service technician. 
Replace after service. 

Before removing the toe kick panel, disconnect 
the range from the electrical power supply. 
Reinstall the toe kick panel before reconnecting 
the range to the power supply and operating the 
range.

Intermittent sparking

•

Ceramic igniter is wet or dirty.

•

Burner ports are clogged.

•

Carefully dry or clean igniter.

•

Clean ports on burner cap with a wire, a 
needle or straightened paper clip.

More than four clicks of 
igniter before lighting

•

Improper fit of burner cap onto 
burner base.

•

Align burner cap properly on burner base. 

Constant Sparking

•

Range is not properly grounded.

•

Electrical power supply is 

incorrectly 

polarized.

•

Refer to Installation Instructions. Have a 
qualified electrician ground the range 
properly. 

•

Refer to Installation Instructions.

Have a qualified electrician ground the 
range properly.

Rating plate(s) located

under front edge of

cooktop.

Wiring/schematic dia-

grams placed behind toe

kick panel.