GE JGRP20 Manuel Du Propriétaire

Page de 28
Using the oven controls.
BAKE Pad
 Touch this pad to select the bake function.
BAKE Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHRYHQ
temperature at this point. Glows when the oven is in bake 
mode.
BROIL HI/LO Pad
 Touch this pad to select the broil function.
BROIL Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQVZLWFKIURPHI to 
LO BROIL at this point. Glows when the oven is in broil mode.
Display
 Shows the operations you have selected, the time of day 
and the cooking status.
COOKING TIME Pad
 Touch this pad and then touch the + or  pad to set the 
amount of time you want your food to cook. The oven will 
shut off when the cooking time has run out.
DELAY START Pad
 Use along with the COOKING TIME or SELF CLEAN pad 
to set the oven to start and stop automatically at a time 
you set.
OVEN LIGHT ON/OFF Pad
  Touch this pad to turn the oven light on or off.
TIMER/CLOCK Pad
 Touch this pad to select the timer feature. Then touch + 
and  pads to adjust time.
To set the clock, touch this pad twice and hold 3 seconds 
and then touch the + and  pads. The time of day will 
flash in the display when the oven is first turned on.
START Pad
 Must be touched to start any cooking function.
– Pad
 Short taps to this pad will decrease the time or 
temperature by small amounts. Touch and hold the pad 
to decrease the time or temperature by larger amounts.
+ Pad
 Short taps to this pad will increase the time or 
temperature by small amounts. Touch and hold the pad 
to increase the time or temperature by larger amounts.
CLEAR/OFF Pad
 Touch this pad to cancel ALL  oven operations except the 
clock and timer.
SELF CLEAN Pad
 Touch this pad to select the self-cleaning function. See the 
Using the self-cleaning oven section.
CLEAN Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHOHQJWKRI
time for the self-clean cycle at this point. Glows when the 
oven is in the self-clean cycle. After the self-clean cycle, the 
light will turn off. Unlatch the door.
If “F–” and a number or letter flash in the display and the oven 
control signals, this indicates a function error code.
Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. 
Put the oven back into operation.
If function error code repeats, disconnect power to the oven and 
call for service.
Oven Control, Clock and Timer Features and Settings
6