GE JGRP20SENSS Manuel Du Propriétaire

For the first self-clean cycle, we recommend 

venting your kitchen with an open window or 

using a ventilation fan or hood.
Remove racks, any broiler pan, broiler grid, all 

cookware and any aluminum foil from the oven.
The shiny, silver-colored oven racks (on some 

models) can be self-cleaned, but they will darken, 

lose their luster and become hard to slide.
Soil on the front frame of the oven and outside 

the gasket on the door will need to be cleaned 

by hand. Clean these areas with hot water, 

soap-filled scrubbing pads or cleansers such as 

Soft Scrub

®

.  Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material 

of the oven door gasket cannot withstand 

abrasion. It is essential for the gasket to remain 

intact. If you notice it becoming worn or frayed, 

replace it.
Wipe up any heavy spillovers on the oven 

bottom.
Make sure the oven light bulb cover is in place 

and the oven light is off.
IMPORTANT:  The health of some birds is 

extremely sensitive to the fumes given off 

during the self-cleaning cycle of any oven. 

Move birds to another well-ventilated room.

   Touch the SELF CLEAN pad.
   Touch the + or – pad to enter the desired 

clean time, if a time other than 4 hours is 

needed.

Clean cycle time is normally 4 hours. You can 

change the clean time to any time between 

3 hours and 5 hours, depending on how dirty 

your oven is.

   Touch the START pad.

The door locks automatically. The display 

will show the clean time remaining. It will not 

be possible to open the oven door until the 

temperature drops below the lock temperature 

and the LOCKED DOOR light goes off.

When the LOCKED DOOR light is off, open the 

door.
The oven shuts off automatically when the 

clean cycle is complete.
NOTES:  

„

  The words LOCK DOOR will flash and the 

oven control will signal if you set the clean 

cycle and forget to close the oven door.

„

  To stop a clean cycle, touch the CLEAR/OFF 

pad. When the LOCKED DOOR light goes 

off indicating the oven has cooled below the 

locking temperature, open the door.

Delay Start is setting the oven to start the clean 

cycle automatically at a later time than the 

present time of day.
NOTE: Before beginning, make sure the oven 

clock shows the correct time of day.

    Touch the SELF CLEAN pad.
   Touch the + or – pad to enter the desired 

clean time.

   Touch the DELAY START pad. The earliest 

start time you can set will appear in the 

display.

   Touch the + or – pad to enter the time of 

day you want the clean cycle to start.

   Touch the START pad.

The door locks automatically. The display will 

show the start time. It will not be possible to 

open the oven door until the temperature 

drops below the lock temperature and the 

LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the 

door.
NOTE:  

„

  You can find out when the clean cycle will 

start by touching the DELAY START pad.

18