GE JGRP20SENSS Manuel Du Propriétaire

Special features of your oven control.

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will

sound followed by one beep every 6 seconds,

until the CLEAR/OFF pad is touched. This

continuous 6-second beep may be canceled.
To cancel the 6-second beep:

Touch the BAKE and BROIL HI/LO pads

at the same time for 2 seconds until the

display shows SF.

Touch the BROIL HI/LO pad. The display

shows CON BEEP (continuous beep). Touch

the BROIL HI/LO pad again. The display

shows BEEP. (This cancels the one beep

every 6 seconds.)

Touch the START pad.

12-Hour Shut-Off

With this feature, should you forget and leave

the oven on, the control will automatically

turn off the oven after 12 hours during baking

functions or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the

steps below:

Touch the BAKE and BROIL HI/LO pads

at the same time for 2 seconds until the

display shows SF.

Touch the DELAY START pad. The display

will show 12 shdn (12 hour shut-off). Touch

the DELAY START pad again and the

display will show no shdn (no shut-off).

Touch the START pad to activate the no

shut-off and leave the control set in this

special features mode.

Your new touch pad control has additional features that you may choose to use. The following are the features and how

you may activate them.
The special feature modes can only be activated while the display is showing the time of day clock. They remain in the

control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power

failure, except for the Sabbath feature, which will have to be reset.

Cook and Hold

Your new control has a cook and hold feature

that keeps cooked foods warm for up to 3 hours

after the cooking function is finished.
To activate this feature, follow the steps below:

Touch the BAKE and BROIL HI/LO pads

at the same time for 2 seconds until the

display shows SF.

Touch the COOKING TIME pad. The display

will show Hld OFF.

Touch the COOKING TIME pad again to

activate the feature. The display will show

Hld ON.

Touch the START pad to activate the cook

and hold feature and leave the control set

in this special features mode.