Gaggenau BO450611 Utilisation Et Entretien

Page de 56
30
Microfiber cloth
 
The honeycomb-structure microfiber cloth is 
particularly suitable for cleaning sensitive surfaces 
such as glass, glass ceramics, stainless steel or 
aluminum (order No. 460770 available from after-sales 
service or in the online shop). It removes watery and 
greasy soiling in one go.
Removing slide-in racks
You can remove the slide-in racks for cleaning.
Removing slide-in racks
1
Place a dish cloth in the oven interior to protect 
the enamel against scratches.
2
Undo the knurled nuts (Figure A). 
3
Detach the slide-in racks (Fig. B).
You can clean the slide-in racks in a dishwasher.
Hooking in slide-in racks
1
Fit slide-in racks the right way round: with the 
longer side pointing up. The left and right-hand 
racks are identical.
2
Tighten the knurled nuts. 
Self-clean (pyrolysis)
During self-clean (pyrolysis), the oven heats up to 
905°F (485°C). Thus, remainders from roasting, 
grilling or baking are burnt up and all you have to do is 
wipe the ash out of the interior.
Self-clean (pyrolysis) takes three hours. You can move 
the self-clean switch-off time (for example, if you 
would like it to run at night).
9
WARNING
During the elimination of soil during self-
cleaning, small amounts of Carbon Monoxide 
can be created and the fiberglass insulation 
could give off very small amounts of 
formaldehyde during the first several cleaning 
cycles. To minimize exposure to these 
substances, provide good ventilation with an 
open window, or use a ventilation fan or hood.
Wipe out excessive spillage before self-cleaning the 
oven.
9
WARNING
Risk of fire
The appliance becomes very hot during 
pyrolytic self-cleaning. Never hang flammable 
items such as dishcloths on the door handle. 
Keep the front of the appliance clear. Keep 
children away.
9
WARNING
Severe health risk
The appliance becomes very hot during 
pyrolytic self-cleaning. The non-stick coatings 
on trays and forms are destroyed and toxic 
gases are produced. Never leave trays and 
forms with non-stick coatings in the oven during 
pyrolytic self-cleaning. Only leave enameled 
accessories in oven during self-clean cycle.
Do not clean parts or accessories in the self-clean 
oven.
$
%