Speed Queen AWN432SP113TW04 Manuel Du Propriétaire

Washer Symptom

Possible Cause/Solution

Wrong Water Temperature

• Make sure that the controls are properly set.
• Check fill hoses. Make sure hot faucet hose is connected to hot

mixing valve (indicated with “H” on the valve bracket) and cold
faucet is connected to cold mixing valve (indicated with “C” on
the valve bracket).

• Make sure laundry room water heater is adjusted properly.
• The Normal Eco cycle uses a colder water temperature.

Low Water Level on Extra Large Setting

• Starting January 2009, the Department of Energy (DOE)

mandated new efficiency standards which resulted in reduced
water levels in the topload washer.

Contact Information

If service is required, contact the nearest Factory Authorized
Service Center. To find the nearest service center, visit us online at
www.speedqueen.com.

If you are unable to locate an authorized service center or are un-
satisfied with the service performed on your unit, contact:

Speed Queen
Shepard Street
P.O. Box 990
Ripon, Wisconsin 54971-0990
www.speedqueen.com
Phone: (920)748-3121

Date Purchased __________________________

Model Number __________________________

Serial Number __________________________

TLW2003N_SVG

1. Serial Plate

When contacting us about your washer, PLEASE GIVE THE MODEL
AND SERIAL NUMBERS. The model and serial numbers are located
on the serial plate. The serial plate will be in the location shown.
Please include a copy of your bill of sale and any service receipts
you have.

If replacement parts are required, contact the source from where
you purchased your washer or visit us online at www.speed-
queen.com.

WARNING

To reduce the risk of serious injury or death, DO NOT

repair or replace any part of the unit or attempt any

servicing unless specifically recommended in the

user-maintenance instructions or in published user-re-

pair instructions that you understand and have the

skills to carry out.

W329

Troubleshooting

DO NOT COPY or TRANSMIT

Part No. 203615R1