Smeg CMSU6451X Manuel D’Utilisation

8

9

A5. Infuser
A6.   Lights
A7.   Control panel 
A8.   Hot water and steam nozzle
A9.   Water tank 
A10. Coffee spout (adjustable height)
A11. Drip tray
A12. Bean container lid
A13. Container for coffee beans
A14. Grinding adjustment knob
A15. Pre-ground coffee funnel door
A16. Compartment for measure
A17. Pre-ground coffee funnel
A18. Power cable
A19. Main switch
A20.   Tray
A21. IEC connector

(page 3 - B)
B1.  Frothed milk regulator
B2.  Milk container handle
B3.  CLEAN button
B4.  Milk intake tube
B5.  Frothed milk spout
B6.  Milk frother 
B7.  Hot water spout
B8.  Measure

(page 3 - C)
A number of buttons on the panel have a double function. This is 
indicated in brackets in the description. 
C1.  Display: guides the user in using the appliance.
C2.  MENU  button  to  activate  or  deactivate  menu  parameter 

setting mode

C3. 

button to select pre-ground coffee 

 

C4.  Rinse button 

to perform a brief rinse to heat the infus-

er.

 

C5. 

 button to deliver hot water. 

 

C6. 

 knob to turn the appliance on and off.

C7.    button to select the coffee taste
C8. 

 button to deliver one or two cups of short coffee 

C9. 

 button to deliver one or two cups of standard coffee 

C10. 

button to deliver one or two cups of long coffee 

C11.    knob to deliver cappuccino or frothed milk 

After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.  
Contact Customer Services. 

 Important! When installing the appliance, respect the 

following safety warnings:
•   Installation must be performed by a qualified professional 

in compliance with legislation in force in the country of 
installation (see section: BUILT-IN INSTALLATION). 

•   The  packing  elements  (plastic  bags,  polystyrene  foam, 

etc.) should be kept out of reach of children as they are a 
safety hazard.

•   Do not install the appliance in rooms where the temper-

ature may drop to 0°C / 32°F or lower (the water in the 
appliance could freeze and cause damage). 

•   You should customise the water hardness as soon as pos-

sible following the instructions in the “SETTING WATER 
HARDNESS” section.

 Danger! Check that the mains power supply voltage 

corresponds to the value indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed and correctly 
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance, 
have the socket replaced with a suitable type by a qualified pro-
fessional. 
To comply with safety directives, an omnipolar switch with a 
minimum contact distance of 3 mm / 0.12 in must be installed. 
Do not use multiple sockets or extensions. 
To learn to use the appliance correctly, the first time you use it 
follow the detailed instructions in the following sections. 

 Important! Safety cutout devices must be included 

in the mains power supply in compliance with the installation 
regulations in the country concerned. 

When the appliance is turned on, the lights (A6) automatically