Summit FFBF181 Manuel D'Instructions
253479
• Sound alarm is switched off by pressing button I. Red signal
lamp and temperature fl ashing are stopped automatically
when the freezer/refrigerator has cooled enough that there is
no more risk of food becoming unsafe to eat.
when the freezer/refrigerator has cooled enough that there is
no more risk of food becoming unsafe to eat.
• If the freezer temperature fails to arrive at the adequate level
24 hours after the alarm was switched off it is activated again,
and again switched off automatically when the freezer has
cooled enough for safe storage of food. During the initial start
of the appliance there is a 24 hour delay of the temperature
alarm to avoid unnecessary alarm operation.
and again switched off automatically when the freezer has
cooled enough for safe storage of food. During the initial start
of the appliance there is a 24 hour delay of the temperature
alarm to avoid unnecessary alarm operation.
Intermittent alarm sound - power failure signal
If the temperature of the refrigerator or freezer is raised too much
as a consequence of power failure, the sound alarm is activated
(intermittent tone), the red signal lamp is on, and the display
fl ashes the highest temperature digit (in the case of the
refrigerator, a maximum of 48°F).
If the temperature of the refrigerator or freezer is raised too much
as a consequence of power failure, the sound alarm is activated
(intermittent tone), the red signal lamp is on, and the display
fl ashes the highest temperature digit (in the case of the
refrigerator, a maximum of 48°F).
Intensive cooling
Intensive cooling of the refrigerator is activated by pressing
the button G (orange signal lamp H is on). It is automatically
switched off after 6 hours, and the selection is set back to the
previous value. It is intended for fast cooling of a large
quantity of food.
the button G (orange signal lamp H is on). It is automatically
switched off after 6 hours, and the selection is set back to the
previous value. It is intended for fast cooling of a large
quantity of food.
Intensive freezing
This is activated by pressing the button E (orange signal lamp
F is on), and the intensive cooling of the freezer starts. If the
setting is not deactivated (by pressing the E button once again),
the setting will be deactivated automatically approximately two
days after activation. Setting is intended for fast freezing of
large quantities of inserted food. In case of power failure the
fast freezing process is repeated. Use the setting also with the
fi rst start of the appliance, before intended cleaning, and in the
case of large quantities of food inserted into the appliance.
F is on), and the intensive cooling of the freezer starts. If the
setting is not deactivated (by pressing the E button once again),
the setting will be deactivated automatically approximately two
days after activation. Setting is intended for fast freezing of
large quantities of inserted food. In case of power failure the
fast freezing process is repeated. Use the setting also with the
fi rst start of the appliance, before intended cleaning, and in the
case of large quantities of food inserted into the appliance.
Child lock
Integrated child lock protects the appliance from accidental
temperature setting changes or even switching the appliance
off. You can activate or deactivate the child lock by pressing the
alarm button (I) for 3 seconds (both displays fl ash ‘LL’ and ‘L’
for 3 seconds). Once the child lock is activated, only the alarm
button is active. Pressing any other button provokes the letters
‘LL’ and ‘L’ to appear on the display.
Integrated child lock protects the appliance from accidental
temperature setting changes or even switching the appliance
off. You can activate or deactivate the child lock by pressing the
alarm button (I) for 3 seconds (both displays fl ash ‘LL’ and ‘L’
for 3 seconds). Once the child lock is activated, only the alarm
button is active. Pressing any other button provokes the letters
‘LL’ and ‘L’ to appear on the display.
11