Summit FF28LWH Manuel D'Instructions

 

  Defrosting Your Refrigerator

This appliance requires no manual defrosting.  During the operation of the compressor, ice will 
build up along the cold rear wall (the evaporator plate is behind the wall).  During the 
compressor’s off-cycle, the ice will melt, drip down, and collect in a tray above the compressor, 
where the compressor’s heat evaporates the water.  If you notice excessive ice build-up on the 
rear wall, try setting the temperature slightly higher (i.e., a lower setting of the thermostat).  Also, 
be sure that the door gasket is sealing well. 

 
  Cleaning Your Refrigerator 

  Turn the temperature control to "OFF", unplug the refrigerator and remove the food, shelves, and 

trays. 

  Wash the inside surfaces with a warm water and baking soda solution. The solution should 

consist of about 2 tablespoons of baking soda to a quart of water. 

  Wash the shelves and trays with a mild detergent solution. 
  The outside of the refrigerator should be cleaned with mild detergent and warm water. 
  Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any 

electrical parts. 

  Wash the outside cabinet with warm water and mild liquid detergent.  Rinse well and wipe dry 

with a clean soft cloth. 

 

  Vacation Time 
  Short vacations: Leave the refrigerator operating during vacations of less than three weeks. 
  Long vacations: If the refrigerator will not be used for several months, remove all food and unplug 

the power cord.  Clean and dry the interior thoroughly.  To prevent odor and mold growth, leave the 
door open slightly, blocking it open if necessary. 

 
 
  Moving Your Refrigerator 

  Remove all the food. 
  Securely tape down all loose items inside your refrigerator. 
  Turn the leveling screw up to the base to avoid damage. 
  Tape the door shut. 
  Be sure the refrigerator stays secure in the upright position during transportation.  Also protect 

the outside of refrigerator with a blanket or similar item. 

 
  Energy Saving Tips 

  The refrigerator should be located in the coolest area of the room, away from heat producing 

appliances, and out of the direct sunlight. 

  Let hot foods cool to room temperature before placing in the refrigerator.  Overloading the 

refrigerator forces the compressor to run longer.  

  Be sure to wrap foods properly, and wipe containers dry before placing them in the refrigerator.  

This cuts down on frost build-up inside the refrigerator. 

  Refrigerator storage bin should not be lined with aluminum foil, wax paper, or paper toweling.  

Liners interfere with cold air circulation, making the refrigerator less efficient. 

  Organize and label food to reduce door openings and extended searches.  Remove as many 

items as needed at one time, and close the door as soon as possible.