British Telecom Converse 2100 40206 Manuel D’Utilisation

If you experience any problems, please visit www.bt.com/producthelp

14

14

1.  Unclip the stand from the base of the 

phone and remove it. Re-route the 
telephone line cord towards the 
bottom of the phone.

2.  Drill two holes in the wall 70mm 

vertically apart using an 8mm drill bit.

3.  Insert the wall plugs if necessary, then 

insert the screws leaving about 5mm 
protruding from the wall on which to 
hang the phone.

4.  Slot the holes on the back of the base over the screw heads and gently pull the 

phone down to fix it securely in place.

If you need to leave the phone whilst on a call, hang the handset on the handset 
park at the top of the base.

Before you wall-mount your BT Converse 2100, 

check that you are not drilling into any hidden 

wiring or pipes.
Make sure the telephone line cord will reach the 

wall socket.

Wall mounting your phone

WALL

WALL PLUG

SCREW

70 mm