Amana ACR4530BAW-WW Manuel Du Propriétaire

BURNER BOWLS (on some models)

Before removing or replacing coil elements and burner bowls, 
make sure they are cool and the control knobs are in the OFF 
position.
Remove the coil element by pushing the edge of the coil element 
toward the receptacle. Lift it enough to clear the burner bowl. Pull 
the coil element straight away from the receptacle to remove. Lift 
out the burner bowl.
Cleaning Method:

Wash frequently in warm, soapy water. (It is not recommended to 
wash chrome bowls in a dishwasher.) A mild abrasive cleaner and a 
plastic scrubber can be used to remove stubborn stains.
For heavily soiled bowls, place an ammonia soaked paper towel on 
the stains and allow to soak for a short time, then gently scrub with 
a plastic scrubber.

SURFACE UNDER COOKTOP (on some models)

The coil cooktop will lift up to provide easy access for cleaning 
beneath. Lift the cooktop by both front corners until the support 
locks into place.
Cleaning Method:

■

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad.

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):
See cover for contact information.

To avoid damage to the range, do not remove the cooktop.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Steel-wool pad

■

For racks that have discolored and are harder to slide, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

Check that storage drawer is cool and empty before cleaning.
Cleaning Method:

■

Mild detergent

The oven light is a standard 40-watt appliance bulb. Before 
replacing, make sure the oven and cooktop are cool and the 
control knobs are in the off position.

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.