AT&T CL83213 Manuel D’Utilisation

Answering system settings

Use the answering system menu of a system handset or 
the telephone base to set up the announcement message, 
turn on or off the answering system or message alert tone, 
activate call screening, or change the number of rings, 
remote access code or message recording time. If you turn 
off the answering system and you change any setting in the answering system 
setup menu, the answering machine automatically turns on again.

1. When the device is in idle mode, press 

 to enter the main menu.

2. Press q

 or p

 to scroll to 

Answering sys, then press 

/�ELECT.

Announcement
Your outgoing announcement plays when calls are answered by the 
answering system. 

The telephone has a default outgoing announcement, “Hello. Please leave a 
message after the tone.” You can use this announcement, or record your own

. 

You can record an announcement up to 90 seconds. The system does not 
record any announcement shorter than two seconds.
To play your current outgoing announcement:

Using a cordless handset:
1. When the handset is in idle mode, press 

 to 

enter the main menu.

2. Press q

 or p

 to scroll to 

Answering sys, then press 

/�ELECT.

3.  Press 

/�ELECT again to select Announcement. 

4. Press q

 or p

 to scroll to 

�lay annc, then press  

/�ELECT.  

Using the telephone base:
1. When the telephone base is in idle mode, press  

 to enter the main menu.

2. Press q

 or p

 to scroll to 

Answering sys, then 

press 

/�ELECT.

3.  Press 

/�ELECT again to select Announcement. 

4. Press 

/�ELECT to select �lay annc. 

        

     

 Play messages
>Answering sys

>

Announcement

Delete all old

        

     

 Record annc

>Play annc

        

     

>Play annc

 Record annc

p

 

 

 

 

 

 

q

        

     

>

Announcement

 Delete all old

p

 

 

 

 

 

 

q

Answering system

75