Whirlpool WEG730H0DB Manuel De Montage

5. Align the gas tube opening in the burner base with the orifice 

holder on the cooktop and the igniter electrode with the notch 
in the burner base.

6. Place the burner caps on the appropriate burner bases.

IMPORTANT: The bottom of the small and medium caps are 
different. Do not put the wrong size burner cap on the burner 
base.

Burner caps should be level when properly positioned. If 
burner caps are not properly positioned, surface burners will 
not light. The burner cap should not rock or wobble when 
properly aligned.

7. Plug into a grounded 3 prong outlet.

1. Slide range into final location, making sure rear leveling leg 

slides into anti-tip bracket.

2. Remove the premium storage drawer. See the “Remove/

Replace Drawer” section.

3. Use a flashlight to look underneath the bottom of the range.

4. Visually check that the rear range foot is inserted into the slot 

of the anti-tip bracket.

1. Slide range into final location, making sure rear leveling leg 

slides into anti-tip bracket. Leave a 1" (2.5 cm) gap between 
the back of the range and the back wall.

2. Place the outside of your foot against the bottom front of the 

warming drawer or baking drawer to keep the range from 
moving, and grasp the back of the range as shown.

3. Slowly attempt to tilt the range forward. 

If you encounter immediate resistance, the range foot is 
engaged in the anti-tip bracket. Go to Step 8.

A

B

C

D

E

A

B