Whirlpool UXT5230BDS Manuel Du Propriétaire

1. To reinstall the filter, place the back edge of the filter into the 

channel at the rear of the range hood. 

2. Pull the filter latch toward the front of the range hood and 

push the front of the filter up into place. 

3. Release the filter latch. It will spring back into place to secure 

the filter.

4. Replace the screw in the filter retainer.

Turn off the range hood and allow the halogen lamp to cool. To 
avoid damage or decreasing the life of the new lamp, do not 
touch the lamp with bare fingers. Replace the lamp, using tissue 
or wearing cotton gloves to handle the lamp.

If new lights do not operate, make sure the lamps are inserted 
correctly before calling service.

1. Disconnect power.

2. Use a flat-blade screwdriver and gently pry the light cover 

loose.

3. Remove the lamp and replace it with a 120-volt, 40-watt 

maximum, halogen lamp made for a G-9 base.

4. Replace the light cover.

5. Reconnect power.

SE119A

Gnd

Ground

Screw

M

S15

Switch Operation

L-1

Lamps 120 V 1.5 Ohms

L-2

Speed 1 120 V 1.5 Ohms

L-3

Speed 2 120 V 2.0 Ohms

2.5 Ohms

120 V

Speed 3

L-4

0.9 ±10% A

110 Watts 

 

27.5 ±10% Ohms

 

55.7 ±10% Ohms

Motor Characteristics

Power Supply

120 VAC

Frequency

60 Hz

Amperage

Wattage Rating

Motor Resistance

Red - Brown

Red - Black

Red - Gray

86.8 ±10% Ohms

W (Common)

BK (Line)

BK (Line)

Y (Lamp)

GY (Speed 3)

R (Speed 2)

BR (Speed 1)

Mechanical push buttons

4 buttons       3 speeds

Y

Y

W

BR

8uF

Y

W

Common

R

Speed 3

Speed 2

Speed 1

BR

W

GY

BK

N

L

Red - White

117.7 ±10% Ohms