Sony HT-CT370 Manuel Du Propriétaire

12

US

Adjusting the settings

You can set the following items with the AMP MENU button on the remote control.
Your settings are retained even if you disconnect the AC power cord (mains lead).

1  Press the AMP MENU button on the remote control to display the amplifier menu window on the display of 

the Bar Speaker.

2  Select the desired setting, using the 

 (return)/  (select)/ (proceed) button, and press the   (enter) 

button.

3 Press the AMP MENU button to exit the amplifier menu window.

DRC 
(Dynamic range control)

You can enjoy Dolby Digital sound at low sound volumes. (ON/
AUTO/OFF)
ON: Compresses sound in accordance with the compression 

information contained in the content.

AUTO: Automatically compresses sound encoded in Dolby TrueHD.
OFF: Sound is not compressed.

AUTO

BASS

Low sound is emphasized. The setting can be changed from –6 to 
+6 in units of 1.

0

TREBLE

High sound is emphasized. The setting can be changed from –6 to 
+6 in units of 1.

0

SYNC 
(AV sync)

You can adjust the sound when the image and the sound are not 
in sync. (ON/OFF)

OFF

DUAL
(Dual mono)

You can enjoy multiplex broadcast sound of Dolby Digital audio. 
(M/S (main and sub channels)/MAIN (main channel)/SUB (sub 
channel))

MAIN

AAV
(Advanced auto volume)

Reduces the volume discrepancies between different programs or 
between programs and commercials. (ON/OFF)

OFF

EFFECT 
(Sound effect)

ON: The sound of the selected sound field is played. It is 

recommended to use this setting.

OFF: The input source is down-mixed for 2 channels.
Note: When “EFFECT (Sound effect)” is set to “OFF,” “EFFECT (Sound 

effect)” is automatically set to “ON” when you change the 
SOUND FIELD setting.

ON

AMP MENU

 (return)/

  (select)/

 (proceed)/

 (enter)