Samsung bd-h6500 Manuel Du Propriétaire

When activated, lets Samsung Call Center 
agents diagnose and fix problems with your 
player remotely. Requires an active Internet 
connection.

| NOTE |

 

Remote Management service might not be 
available in some countries.

 

To use Remote Management:

1) Call the Samsung Contact Center and ask for 

remote support.

2) Open the player's menu on your TV and go to 

the Support section.

3) Select Remote Management, and then read 

and agree to the service agreements. When 
the PIN screen appears, provide the PIN 
number to the agent.

4) The agent accesses your player.

The Software Update menu allows you to 
upgrade the product's software for performance 
improvements or additional services.

Provides contact information for assistance 
with your product.

Resets all settings to their default settings 
except for the network and Smart Hub 
settings, and then starts the Setup function.  
To use, you must enter the security PIN. The 
default security PIN is 0000.

When you connect this product to a network, 
you can use network based applications and 
functions such as Smart Hub and BD-LIVE, and 
upgrade the product's software through the 
network connection. For more information 
about accessing and using Internet services, 
see the Network Services chapter of this 
manual on pages 38~46. Instructions for 
configuring the network connection start 
below.

Before you begin, contact your ISP to find 
out if your IP address is static or dynamic. If it 
is dynamic, and you have a wired or wireless 
network, we recommend using the Automatic 
configuration procedures described below. 
If you are connecting to a wired network, 
connect the product to your router using a 
LAN cable before you start the configuration 
procedure. 
If you are connecting to a wireless network, 
disconnect any wired network connection 
before you begin. 
To begin configuring your network connection, 
follow these steps:

 

Ğ

1.  In the Home screen, select Settings, and 

then press the v button.

2.  Select Network, and then press the v 

button.

3.  Select Network Settings, and then press 

the v button.

4.  Select Wired in the Network Settings 

screen, and then press the v button.

5.  Select the Connect button, and then press 

the v button. The product detects the 

wired connection, verifies the network 
connection and then connects to the 
network.