Premium PFR10680M Manuel Du Propriétaire
INSTALLATION INSTRUCTIONS
Before Using Your Freezer
x
Remove the exterior and interior packing.
x
Check to be sure you have all the following parts:
o 1 Storage Basket
o 1 Instruction Manual
o 1 Plastic Scraper (optional)
x
Before connecting the freezer to the power source, let it stand upright
for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
x
Clean the inside with a damp warm cloth with water and baking soda
solution.
solution.
Installing Your Freezer
x
This appliance is designed to be freestanding only, and should not be
recessed or built-in.
recessed or built-in.
x
Place your freezer on a floor that is strong enough to support the freezer
when it is fully loaded.
when it is fully loaded.
x
Allow 6 inches of space between the back and sides of the freezer, to
allow the proper air circulation.
allow the proper air circulation.
x
Place the freezer away from direct sunlight and heat sources (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Extreme cold
environmental temperatures may also cause the freezer not to perform
properly.
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Extreme cold
environmental temperatures may also cause the freezer not to perform
properly.
x
Avoid locating the freezer in moist areas.
x
Plug the freezer into an exclusive, properly installed-grounded wall
outlet. Do not, under any circumstances, cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an
authorized service center.
outlet. Do not, under any circumstances, cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an
authorized service center.
x
After plugging the appliance into a wall outlet, allow the unit to cool
down for 2~3 hours before placing food in the freezer compartment.
down for 2~3 hours before placing food in the freezer compartment.
x
Do not use extension cords.
Electrical Connection
For your safety please read the following information
For your safety please read the following information
OPERATING YOUR FREEZER
Temperature Control
x
Your freezer has one control for regulating the temperature. The
temperature control is located on the lower right hand corner.
temperature control is located on the lower right hand corner.