GE ADER65LS Manuel Du Propriétaire

Ŷ

  Use this appliance only for its intended 

purpose as described in this Owner’s Manual. 

Ŷ

   This dehumidifier must be properly installed 

Ŷ

   Never operate this dehumidifier in an area 

If this condition develops, for your safety 

disconnect the power supply before stepping 

into the water.

Ŷ

   Never unplug your dehumidifier by pulling on 

the power cord. Always grip plug firmly and 

pull straight out from the receptacle. 

Ŷ

   Replace immediately all electric service 

cords that have become frayed or otherwise 

damaged. A damaged power supply cord 

must be replaced with a new power supply 

cord obtained from the manufacturer and not 

repaired. Do not use a cord that shows cracks 

or abrasion damage along its length or at 

either the plug or connector end.

Ŷ

   If the receptacle does not match the plug, 

the receptacle must be changed out by a 

qualified electrician

Ŷ

   Turn the dehumidifier OFF and unplug it 

before cleaning.

Ŷ

   GE does not support any servicing of 

the dehumidifier. We strongly recommend 

that you do not attempt to service the 

dehumidifier yourself.

Ŷ

  For your safety, do not store or use 

combustible materials, gasoline or other 

flammable vapors or liquids in the vicinity  

of this or any other appliance.

Ŷ

   All dehumidifiers contain refrigerants, which 

under federal law must be removed prior to 

product disposal. If you are getting rid of an 

old product with refrigerants, check with the 

company handling disposal about what to 

do.

Ŷ

   Do not use outdoors.

Ŷ

   This dehumidifier is intended for 

indoor residential applications only.  

This dehumidifier should not be used  

for commercial or industrial applications.

Ŷ

   These R410A Dehumidifier Systems require    

contractors and technicians to use tools, 

equipment and safety standards approved 

for use with this refrigerant.  DO NOT use 

equipment certified for R22 refrigerant only.

DO NOT use an adapter plug with this appliance.
The power cord of this appliance is equipped 

with a 3-prong (grounding) plug which mates 

with a standard 3-prong (grounding) wall outlet 

to minimize the possibility of electric  

shock hazard from this appliance.
Have the wall outlet and circuit checked by a 

qualified electrician to make sure the outlet is 

properly grounded.

Where a 2-prong wall outlet is encountered,  

it is your personal responsibility and obligation to 

have it replaced with a properly grounded  

3-prong wall outlet.
The dehumidifier should always be  

plugged into its own individual electrical  

outlet, which has a voltage rating matching  

the rating plate.
This provides the best performance and also 

prevents overloading house wiring circuits, which 

could cause a fire hazard from overheated wires.

2